HP Probook 450 G4 High Sierra - no entry

[justinjools]

Hi, I have been following this guide and successfully built the boot disk (unibeast and multibeast) using UEFI. It boots to Clover and I chose install high sierra option but at the end of the process I get the no entry sign.

Should I choose legacy boot for laptops? What else do I need to do?

https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.235474/

HP Probook 450 G4
i5-7200 @ 2.5ghz

 

[Feartech]

Hi, I have been following this guide and successfully built the boot disk (unibeast and multibeast) using UEFI. It boots to Clover and I chose install high sierra option but at the end of the process I get the no entry sign.

Should I choose legacy boot for laptops? What else do I need to do?

https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.235474/

HP Probook 450 G4
i5-7200 @ 2.5ghz

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

Overview The purpose of this guide is to provide a step-by-step guide to installing Mojave, High Sierra, Sierra, El Capitan, or Yosemite on the ProBook/EliteBook/Zbook equipped with Intel graphics. Note: For Broadwell and Skylake hardware, you must install at least 10.11. Broadwell support in...

www.tonymacx86.com

 

[justinjools]

Is this the best way to do it then?

Ah reading I see you can't Unibeast/Multibeast method for laptops.

 

[Feartech]

Is this the best way to do it then?

Ah reading I see you can't Unibeast/Multibeast method for laptops.

yes, the best guide you will ever get

 

[justinjools]

Hi, I got MacOS running on my HP Probook G4 450 but now trying to figure out how to get the network ethernet settings working. I have PPoE and Bluetooth showing but no settings. I tried to load Multibeast Realtek driver but it said failed to install. Do I need to plug a LAN cable? and how do I get wifi working? Do I have to buy a separate compatible wifi card as I saw on a forum.

 

[Feartech]

Hi, I got MacOS running on my HP Probook G4 450 but now trying to figure out how to get the network ethernet settings work. I have PPoE and Bluetooth showing but now settings. I tried to load Multibeast Realtek driver but it said failed to load. Do I need to plug a LAN cable? and how do I get wifi working? Do I have to buy a seperate compatible wifi card as I saw on a forum.

the guide doesn't use multibeast, why did you use that for?

 

[justinjools]

I thought that's how you might get the ethernet/wifi running but I've now learnt that I need to buy a wifi card.

I see the Dell DW1510 BCM4322 chip is the easiest but you need bluetooth to run Apple devices so the Dell DW1550 or DW1830 would be best unless you have any recommendations.

Best WIFI adapter for PC in 2023: PCIe and USB dongles for boosting Wi-Fi

The best wireless adapters to add Wi-Fi to your devices

www.modmy.com

i just discovered after 2 hours reading on this subject I can just get a wifi usb adapter which is fine although no bluetooth but is okay.

 

[justinjools]

I ordered an 1820a on ebay. Let you know how this goes.