- Joined
- Feb 22, 2019
- Messages
- 45
- Motherboard
- Asus Vivobook X542UA
- CPU
- i5-8250U
- Graphics
- UHD 620
- Mobile Phone
Ben, thank you for helping me.
If ACPIBatteryManager.kext not removed, we got
kext stall[0], (60s): 'SMCSMBusController'
Still not patched this. Planning to do it in 2-3 days.You did not patch _CRS for GPIO interrupts. Is your trackpad working? Anyway, it'll work better with GPIO...
Removed. VoodooI2C updated.VoodooI2CSynaptics does not attach to any device on your system,, see the IONameMatch it has... The source if the problem is somewhere else, you should be able to remove it with 0 harm.
Removed.Why do you have SSDT.aml? Usually you only need the PluginType injection in your config.plist. Remove it...
Updated.Clover is not latest - update it
Removed both.You cannot have both AptioMemoryFix-64.efi and OsxAptioFix3Drv-64.efi. Remove OsxAptio...
DataHubDxe-64.efi is usually not needed. Try booting without it.
Done. And one more thing: ACPIBatteryManager.kext also must be removed - VirtualSMC do this too.You have the VirtualSMC sensors in Clover, but they cannot be used without VirtualSMC itself. If you want to use it, remove FakeSMC and the FakeSMC sensors (From both Clover and /L/E), also remove SMCHelper-64.efi.
Install VirtualSMC to both Clover and /L/E, keep the sensors in /L/E only (they are not necessary for booting...)
If ACPIBatteryManager.kext not removed, we got
kext stall[0], (60s): 'SMCSMBusController'
Still not working. When InjectKexts=Detect, booting stuck between progress bar = 100% and showing login screen. I see semi-transparent Apple logo with progress bar at 100%, and semi-transparent login screen over . System does not responds after this.Once again - when you have kexts in both Clover and /L/E (the correct approach), you need InjectKexts=Detect. See how it goes after applying all changes above.