- Joined
- Apr 23, 2019
- Messages
- 4
- Motherboard
- Gigabyte X99 UD4
- CPU
- i7-5820K
- Graphics
- GT-740
This is the first time I try to install hackintosh on my desk top. And I succeeded get auto update of 10.14.4
I mostly refer to the installation guide of these two threads:
the standard one,
and another one of 10.13 which has the same motherboard as mine,
I seems to get everything work so far after some google searching and trying.
Actually I missed some of the installation capture as I was not assuming to finish it the first time I try.
So just to inform you this motherboard can work well.
The Geforce 740 is fully supported I think,
Audio onboard I tried both AppleALC and VoodooHDA, but is seems Voodo sometimes halt my system booting, so I uninstalled it, and Apple ALC works fine. Now both onboard audio and usb audio works.
I thought I installed RTL8812AU driver to make my wireless network usb card work, I don't have a lan cable so I haven't test the onboard ethernet card yet.
The USB 3.0 also seems to work for now, using XHCI-unsupported.kext, and the patches in clover config is attached(I never modified these patched, no idea if it was multibeast that edited automatically)
These are some screen shots of my current system configuration, hope it can helps
I mostly refer to the installation guide of these two threads:
the standard one,
UniBeast: Install macOS Mojave on Any Supported Intel-based PC
The following guide is a complete walkthrough for updating to or installing a fresh version of macOS Mojave. It requires no experience and all of the basic installation and post-installation tools are available on tonymacx86.com. Table of Contents Step 1: Download macOS Mojave Step 2: Create...
www.tonymacx86.com
[SUCCESS] i7-5820k / GTX 970 / GA-X99-UD4 High Sierra 10.13 [Clover Guide] (100% Working)
Here is a full install guide using Unibeast / Clover to install Mac OS High Sierra 10.13 on your custom built Haswell E X99 Computer! I made this guide from information gathered on the TonyMac forums. It's based on my guide from 10.12, except 10.13 is as of now most solid version of MacOs for...
www.tonymacx86.com
I seems to get everything work so far after some google searching and trying.
Actually I missed some of the installation capture as I was not assuming to finish it the first time I try.
So just to inform you this motherboard can work well.
The Geforce 740 is fully supported I think,
Audio onboard I tried both AppleALC and VoodooHDA, but is seems Voodo sometimes halt my system booting, so I uninstalled it, and Apple ALC works fine. Now both onboard audio and usb audio works.
I thought I installed RTL8812AU driver to make my wireless network usb card work, I don't have a lan cable so I haven't test the onboard ethernet card yet.
The USB 3.0 also seems to work for now, using XHCI-unsupported.kext, and the patches in clover config is attached(I never modified these patched, no idea if it was multibeast that edited automatically)
These are some screen shots of my current system configuration, hope it can helps
Attachments
-
Screen Shot 2019-05-11 at 12.13.41 PM.png77.6 KB · Views: 757
-
Screen Shot 2019-05-11 at 12.24.36 PM.png41.5 KB · Views: 682
-
Screen Shot 2019-05-11 at 12.25.02 PM.png81.4 KB · Views: 621
-
Screen Shot 2019-05-11 at 12.27.14 PM.png84.7 KB · Views: 628
-
Screen Shot 2019-05-11 at 12.28.06 PM.png204.8 KB · Views: 641
-
Screen Shot 2019-05-11 at 12.28.45 PM.png23.9 KB · Views: 632
-
Screen Shot 2019-05-11 at 12.28.54 PM.png34.9 KB · Views: 583