- Joined
- Apr 19, 2019
- Messages
- 12
- Motherboard
- ASUS FX553VD (GL553VD Board)
- CPU
- i7-7700HQ
- Graphics
- HD 630 + GTX 1050 1920x1080
- Mobile Phone
Hello all,
Well, I have a laptop having the following configuration.
ASUS FX553VD-DM483 (GL553VD Board)
Display: 1920x1080 FHD
CPU: Intel i7-7700HQ Quad Core 2.8 GHz
GPU: Intel HD 630 + Nvidia 1050 2 GB (Optimus)
Hard Drive: Inbuilt 1 TB Hard Drive
SSD: WD Blue 500 GB M.2 SSD (Didn't come with a laptop, I added it later)
PS2 Keyboard and I2C Elan1200 Precision Touchpad.
I tried installing MacOS Mojave with Unibeast by the manual method using this guide.
It takes too much time for loading with the following error:
Kextd stall, (240s): 'AppleACPICPU'
It takes so much of time to boot into the installer and when it eventually did, it installed and again after rebooting it took so much of time. Installation was done and now I am trying to boot into the MacOS from USB, it gets stuck on Apple Logo and just then the screen just blacks out.
(my guess is, maybe because it is trying to load Nvidia Drivers, which is making it stall, but I am using RehabMan's laptop config files)
But when I tried with UniBeast tool, the installation just worked like a charm. Just there was one problem - It rebooted abruptly while installing when it was saying (2 mins remaining). I was concerned about that but when I booted to that partition again, it just worked.
Now I have a question. What difference it would make if I install with Unibeast tool vs the manual method.
I want a stable build so what approach will be great?
Sorry, I am so new to this, so any help is really appreciated.
Thanks a lot for giving your time to read.
Well, I have a laptop having the following configuration.
ASUS FX553VD-DM483 (GL553VD Board)
Display: 1920x1080 FHD
CPU: Intel i7-7700HQ Quad Core 2.8 GHz
GPU: Intel HD 630 + Nvidia 1050 2 GB (Optimus)
Hard Drive: Inbuilt 1 TB Hard Drive
SSD: WD Blue 500 GB M.2 SSD (Didn't come with a laptop, I added it later)
PS2 Keyboard and I2C Elan1200 Precision Touchpad.
I tried installing MacOS Mojave with Unibeast by the manual method using this guide.
It takes too much time for loading with the following error:
Kextd stall, (240s): 'AppleACPICPU'
It takes so much of time to boot into the installer and when it eventually did, it installed and again after rebooting it took so much of time. Installation was done and now I am trying to boot into the MacOS from USB, it gets stuck on Apple Logo and just then the screen just blacks out.
(my guess is, maybe because it is trying to load Nvidia Drivers, which is making it stall, but I am using RehabMan's laptop config files)
But when I tried with UniBeast tool, the installation just worked like a charm. Just there was one problem - It rebooted abruptly while installing when it was saying (2 mins remaining). I was concerned about that but when I booted to that partition again, it just worked.
Now I have a question. What difference it would make if I install with Unibeast tool vs the manual method.
I want a stable build so what approach will be great?
Sorry, I am so new to this, so any help is really appreciated.
Thanks a lot for giving your time to read.