Contribute
Register

[Guide] HP ProBook 430 G3 (SkyLake) - Mojave

Status
Not open for further replies.
I put the battery indicator display at 430 G3, but it was displayed momentarily and disappeared.
Battery indicator is necessary when going out
1, 430G3 is very comfortable with the information on antonio765, but does your battery indicator work in your work?
2, I guess that the power management AML and DSDT of my work are wrong, but I do not know what to start with.
Thank you

1) Update your BIOS
2) unplug both charger and battery, press power button, keep it pressed for 60 sec.
 
The battery indicator has come out. Again, I was able to rebuild the installation steps in order.
Thank you for the advice.
I could not do this without your work(RehabMan, antonio765).
Thank you.
 

Attachments

  • スクリーンショット 2019-04-29 14.45.42.png
    スクリーンショット 2019-04-29 14.45.42.png
    26.2 KB · Views: 113
Thanks for your guide, well written and informative.

Say, what's all this git stuff for? Is there no way to do this offline?

- WiFi Intel 3165 - known to be unsupported, replaced with Dell DW1560 (chipset Broadcom BCM94352Z)

How does the exchange of the wifi cards work? ifixit doesn't really have anything on this. I don't see it under the easily removable cover, so do you have to take the laptop apart for the exchange?
 
Thanks to everyone, I was able to add WIFI and SD card to the 430G3.
bios is up to date.
I am very happy to have my desired mobile communication.
Here are the EFI and Extensions.
I hope you find it useful.
Thank you very much.
 

Attachments

  • Extensions.zip
    6.5 MB · Views: 220
  • EFI.zip
    20.5 MB · Views: 303
I don't see it under the easily removable cover, so do you have to take the laptop apart for the exchange?
You can check the location of the WiFi CARD by removing the cover.
403011
 
Thanks to everyone, I was able to add WIFI and SD card to the 430G3.
bios is up to date.
I am very happy to have my desired mobile communication.
Here are the EFI and Extensions.
I hope you find it useful.
Thank you very much.
All completed
All succeeded
I am glad because it is very kind.
My 430G3 is all working fine.
I was moved by the sincerity and kindness of antonio 765 and oldmacharu.
 
Last edited:
Got Mojave run on my 450G3, everything works except battery indicator always show 0%. Does anyone got the same problem?
 
Got Mojave run on my 450G3, everything works except battery indicator always show 0%. Does anyone got the same problem?
My answer is unreliable.
My 430 G3 battery is displayed properly. I think that the # 41 procedure is necessary, but I can not assert that the model is slightly different. I am very sorry but I do not have any further information.
 
My answer is unreliable.
My 430 G3 battery is displayed properly. I think that the # 41 procedure is necessary, but I can not assert that the model is slightly different. I am very sorry but I do not have any further information.
Thanks Mitshuhiro san. I'll try the method at #41.
Update: After update system BIOS to latest version, it's ok now. Another issue that it's cannot enter sleep state.
 
Last edited:
Thanks Mitshuhiro san. I'll try the method at #41.
Update: After update system BIOS to latest version, it's ok now. Another issue that it's cannot enter sleep state.
My HP 430G3 sleeps. There is no problem with return. Re-checking the BIOS screen may solve the problem. The attached BIOS screen is my BIOS setting.
 

Attachments

  • HP 430G3 BIOS.zip
    1.2 MB · Views: 128
Status
Not open for further replies.
Back
Top