Contribute
Register

FIX for boot hangs after BIOS update (ACPI PATCH)

Status
Not open for further replies.
Joined
May 11, 2011
Messages
1,143
Motherboard
Asrock B365M Phantom Gaming
CPU
i5-9600KF
Graphics
RX 580
Mobile Phone
  1. iOS
This is an ACPI Patch for the people who update to the last bios and can't boot.
My board is the MSI B360A-Pro and has the latest bios 7B22v27.

First add the patch (the blue line from the picture) to clover config, then apply the Bios update.
To easily add the patch using terminal, read post
#48


Screen Shot 2019-04-09 at 4.19.47 PM.png
 
Last edited:
This is a ACPI Patch for the people who update to the last bios and can't boot.
My board is the MSI B360A-Pro and has the last bios 7B22v27.


View attachment 398459

What is the bug that this fixes? Is it specific to your particular motherboard? Specific to B360? Thanks.
 
What is the bug that this fixes? Is it specific to your particular motherboard? Specific to B360? Thanks.

Its for my motherboard, can work with other z370,h370,b360 motherboards. I didnt had other systems to test.
 
What is the bug that this fixes? Is it specific to your particular motherboard? Specific to B360? Thanks.
@mattystonnie too

Hi both. If this can be verified it's going to be very useful :thumbup:

Quite a few members have had this problem with 10.14.4 updates when they also update the BIOS.

:)
 
I'm glad to hear that, thx.
 
What is technicaly behind this patch ? what is patched, how is it working ?
thanks!

ACPI hot patch, RTC FIX. Compared the new bios with the old one, replaced hexadecimal.
Tempted to try? :twisted:
 
I'm using a modified Gigabyte F11 #5. In Xcode, viewing my config file: All three of my RTC-type values are "Boolean" with a yes or no. Is this ACPI patch to be entered manually as shown in Clover Configurator with the same figures shown in Post #1 at the top?
@mattystonnie
@jb007
@kgp
 
I'm using a modified Gigabyte F11 #5. In Xcode, viewing my config file: All three of my RTC-type values are "Boolean" with a yes or no. Is this ACPI patch to be entered manually as shown in Clover Configurator with the same figures shown in Post #1 at the top?
@mattystonnie
@jb007
@kgp

Yes.
 
Status
Not open for further replies.
Back
Top