Contribute
Register

The everything works Asus Z390-I Gaming * i7-8700K * SAPPHIRE NITRO+ Radeon RX Vega 64 Build

I'll try now.... and I'm using latest BIOS just released 3 days ago.....

I was just looking through your BIOS manual and it seems you have a setting for Serial Port, can you make sure it's set to off?
 
I tried setting it off this time ......
but no luck..... This verbose is same as last time I think .....
 

Attachments

  • image.jpeg
    image.jpeg
    1 MB · Views: 112
  • image.jpeg
    image.jpeg
    1.3 MB · Views: 116
  • image.jpeg
    image.jpeg
    1.7 MB · Views: 102
  • image.jpeg
    image.jpeg
    1.6 MB · Views: 99
  • image.jpeg
    image.jpeg
    1.9 MB · Views: 106
  • image.jpeg
    image.jpeg
    1.8 MB · Views: 107
  • image.jpeg
    image.jpeg
    1.4 MB · Views: 109
  • image.jpeg
    image.jpeg
    2.1 MB · Views: 106
  • image.jpeg
    image.jpeg
    2.1 MB · Views: 103
  • image.jpeg
    image.jpeg
    2.1 MB · Views: 103
  • image.jpeg
    image.jpeg
    2.2 MB · Views: 95
  • image.jpeg
    image.jpeg
    1.7 MB · Views: 101
  • image.jpeg
    image.jpeg
    2.1 MB · Views: 104
  • image.jpeg
    image.jpeg
    1.4 MB · Views: 113
@pupin I was wondering if you could take a look at this DSDT. I checked it out and found the
Code:
Method (_STA, 0, NotSerialized)  // _STA: Status

Can you confirm the patch is needed? He can't seem to get to the installer.
No, this DSDT does not have the bug. But the question is, is this DSDT before he upgraded BIOS or after?
Also, I looked at his screenshots quickly - I'm no big expert, but it seems to me like a GPU issue. I have no idea what GPU he is using, but OSX seems to be loaded fine, just nothing is displayed. Perhaps display output is coming from a different port or different GPU?
 
I tried setting it off this time ......
but no luck..... This verbose is same as last time I think .....
disable your serial port as evidence is present in your last image
 
No, this DSDT does not have the bug. But the question is, is this DSDT before he upgraded BIOS or after?
Also, I looked at his screenshots quickly - I'm no big expert, but it seems to me like a GPU issue. I have no idea what GPU he is using, but OSX seems to be loaded fine, just nothing is displayed. Perhaps display output is coming from a different port or different GPU?

After updating BIOS....
I'm using integrated GPU....
And I'm using HDMI cable.....
 
I disabled it

How are you resetting your BIOS? Are you shorting the pins or are you loading optimized settings? This is critical for met confirm.

The attached EFI is stripped to the bone, enables verbose, and uses different driver. Sound, WiFI, and USB will not work. Let me know if you can boot with this.
 

Attachments

  • EFI.zip
    19.6 MB · Views: 140
Back
Top