Contribute
Register

[Guide] Fanless mini Mojave: i5-8600 | Gigabyte Z370N WiFi | Intel HD630

Status
Not open for further replies.
com.apple.AppleMultitouchTrackpad
com.apple.driver.AppleBluetoothMultitouch.trackpad

Okay, those are the trackpad drivers. When you said bluetooth drivers, I was nervous, but I misunderstood. These are for the MT2. Well done!

The question is ... why did Apple release apparently modified drivers with less functionality to High Sierra? Either 1) they screwed up (in which case surely someone noticed since) or 2) they intentionally deprecated functionality intending for users to migrate to Mojave.

Something odd but good you have the functionality back!
 
One example: support the newest series of Intel processors (the 9th Gen).

I'm wondering if you have updated BIOS to F12?

I want back to F12 a couple of days ago, but today I had another failure to wake from deep sleep (meaning system light off) and so I've gone back to F10. I'll sit and see how that performs, but previously it never failed to wake.
 
I'm wondering if you have updated BIOS to F12?

I want back to F12 a couple of days ago, but today I had another failure to wake from deep sleep (meaning system light off) and so I've gone back to F10. I'll sit and see how that performs, but previously it never failed to wake.
No, I have not. My hackintosh is my production machine and I have been working on a big project in the last few months, so I can't afford to have it stop working. But I am definitely following all the developments in this and other threads and will try to catch up with them as soon as I have some free time.
 
You're right not to hurry. Also if you're running B1's build probably the discrete gpu means different sleep/wake behaviour. For me on igpu, I can't bear when it won't wake. We shall see.
 
You're right not to hurry. Also if you're running B1's build probably the discrete gpu means different sleep/wake behaviour. For me on igpu, I can't bear when it won't wake. We shall see.

What is your pmset -g settings?
 
What is your pmset -g settings?

Here it is, thanks B1. I had a look in case, but because I haven't touched it since I built the machine under Mojave and sleep/wake has always worked, I discounted it.

Screen Shot 2019-04-10 at 09.31.02.png
 
Can I ask, are any of the users following this thread using a 4k60 monitor with the intel GPU?

With the 10.14.4 and mark's EFI folder I have some issues.

I am using a single monitor setup (Philips 276E) and get glitches in every configuration except DisplayPort 1.1 which is limited to 30hz.

The following are the issues with other modes:
DP 1.2 (4K60 et al) - monitor cycles on and off, showing desktop for a few seconds ad infinitum

HDMI (4K60) - green glitching a few times per minute

HDMI (4K50) - monitor cycles once every ten minutes

Any advice would be appreciated.
 

Attachments

  • EssentialsList-2019-04-10 08.24.51.zip
    395.2 KB · Views: 66
Can I ask, are any of the users following this thread using a 4k60 monitor with the intel GPU?

With the 10.14.4 and mark's EFI folder I have some issues.

I am using a single monitor setup (Philips 276E) and get glitches in every configuration except DisplayPort 1.1 which is limited to 30hz.

The following are the issues with other modes:
DP 1.2 (4K60 et al) - monitor cycles on and off, showing desktop for a few seconds ad infinitum

HDMI (4K60) - green glitching a few times per minute

HDMI (4K50) - monitor cycles once every ten minutes

Any advice would be appreciated.

Check this out.
 
I am using a single monitor setup (Philips 276E)

So I had a look at your Essentials and I can't see anything wrong. Your config is the same as mine. You have some more kexts in LE but they don't seem relevant to the problem AFAIK.

My monitor works fine, but after following B1's link ...


I can see that the current framebuffer properties they quote for our m/b are different to what I've been using. I've replaced the ones in my config.plist and there's no difference to my monitor behaviour. It might help you.

Attached is my current config.plist (remember to select model 18.1 from the pick list in Clover Configurator).

If you try it, like to know how it goes. In mine, I expected the Connectors section in Hackintool to look different after I applied the changes but it looks the same.
 

Attachments

  • config.plist
    9.7 KB · Views: 106
Last edited:
Status
Not open for further replies.
Back
Top