Contribute
Register

HP EliteDesk 800 G2 / HP ProDesk 600 G2 - SUCCESS

Status
Not open for further replies.
I resolved an issue with a crash.
2. I have used first USB 2.0 socket instead of usb3 one I used earlier.
p.s. Prodesk 600 G2

The USB3 issue should be added to the first post, so that others don't have to search the thread. Using a USB3 port results in a crash with a scrambled screen.

I run into another issue: I got the AppleACPICPU timeout four times (means i had to wait 16 minutes), but after that, i could continue the installation (fresh install of 10.14.4).
 
Just installed Mojave yesterday on my EliteDesk 800 G2 Mini. Works quite smooth even in 4k resolution. What doesn´t work yet is BT, WIFI and internal Audio. Just wonder if I am the only one with the "Mini" build?
 

Attachments

  • HP ED 800 G2 mini.jpeg
    HP ED 800 G2 mini.jpeg
    243.7 KB · Views: 202
Try layout id 11 or 13 for audio. If you are connected to a tv or monitor with speakers then the audio will be greyed out on the finder bar and controlled by the tv/monitor. From what I can see there are 4 types of WiFi/Bluetooth card for your g2 mini. They are all intel and intel WiFi cards don’t work with hackintoshes. Find a compatible card and replace it is probably the best option
 
This is great. I have the same model and if you have time, can you tell me which guides you used?

1. SSD
2. BIOS settings

Thanks
 
Just installed Mojave yesterday on my EliteDesk 800 G2 Mini. Works quite smooth even in 4k resolution. What doesn´t work yet is BT, WIFI and internal Audio. Just wonder if I am the only one with the "Mini" build?

This is great. I have the same model and if you have time, can you tell me which guides you used?

1. SSD
2. BIOS settings

Thanks
 
I would like to know if someone has had experience with an HP EliteDesk 800 G2 SFF and install a MSI GT1030 2GB graphics card (1 DispalyPort + 1 HDMI) Low Profile. I have used several tutorials and I only manage 1 single port to work and I would like them to take both ports.

Please your support.
 
I haven’t any experience with this card but If your running mojave it won’t work as there are currently no web drivers from nVidia. You may get a display but you won’t have any acceleration. You’ll be better off with the onboard DP. If you require HDMI then buy and DP to HDMI active adapter (for 4K) or a cheaper DP to HDMI passive cable (1080p max)
 
Just installed Mojave yesterday on my EliteDesk 800 G2 Mini. Works quite smooth even in 4k resolution. What doesn´t work yet is BT, WIFI and internal Audio. Just wonder if I am the only one with the "Mini" build?
I got it now working quite good. Will upload the EFI later. Although it works quite good, it doesn´t recognize Storage devices at USB3.0 ports, but it does over a connected USB2.0-Hub then. But it Wifi-Dongle again, works at the ports directly.
 
Status
Not open for further replies.
Back
Top