Contribute
Register

[Success] PYNTy-Mac i7 8700 - Z390 I AORUS PRO WIFI - 16GB RAM - Sapphire RX 580 - Mojave 10.14.3

Status
Not open for further replies.
Hi, I am a newby... used your EFi file to install and i got it running.
only differance i got an i9-9900k. At about this mac Proccesor Now it shows 3,6 ghz unknown.

Is this a problem? Wil this infuance speed and preformance?
 
the geekbench scores
 

Attachments

  • Screenshot 2019-03-26 at 19.09.56.png
    Screenshot 2019-03-26 at 19.09.56.png
    108.6 KB · Views: 224
Hi,
Hi, I am a newby... used your EFi file to install and i got it running.
only differance i got an i9-9900k. At about this mac Proccesor Now it shows 3,6 ghz unknown.

Is this a problem? Wil this infuance speed and preformance?

Hi, The processor's information on "about this Mac is just steethic, as it was not supported until now, but from the A2115 model, yes. We have to wait until the SMbios is updated.

I'm glad I served you my Efi folder, keep in mind that I have an i8700 (no K)
 
the geekbench scores

They're excelling, if you want even more, you can make OC to the I9 and take it to 5ghz or 5,1ghz, Configurate it from the bios
 
Hi,


Hi, The processor's information on "about this Mac is just steethic, as it was not supported until now, but from the A2115 model, yes. We have to wait until the SMbios is updated.

I'm glad I served you my Efi folder, keep in mind that I have an i8700 (no K)

But does it matter that i used the i8700 efi file in preformance?

new overclocked scores!!
 

Attachments

  • Screenshot 2019-03-26 at 20.11.17.png
    Screenshot 2019-03-26 at 20.11.17.png
    154.2 KB · Views: 192
But does it matter that i used the i8700 efi file in preformance?

new overclocked scores!!

Hi, in the devices-properties (of config.plist) I added the configuration to IGPU of coffe Lake to work in my system. I think it should work in your system too. I have Mojave working perfectly from the compilation. If you have any inconvenience, you'll tell us, I ll update my cpu later on to an I9-9900k
 
I am trying to add the acceleration to the UHD 630 of my 9900k but it doesn't work. It says Intel UHD 630 7mb (7mb... :D). I followed the steps for the Hackintool that I saw here but it's not working: I get a black screen. I have the aorus Pro (non wifi).

Any ideas?

EDIT-UPDATE!: I made it! Just following the steps with Hackintool and replacing the Index 3 in the Connections TAB with 0x04 and changing the Index 2 to 0x06.
 
Last edited:
I am trying to add the acceleration to the UHD 630 of my 9900k but it doesn't work. It says Intel UHD 630 7mb (7mb... :D). I followed the steps for the Hackintool that I saw here but it's not working: I get a black screen. I have the aorus Pro (non wifi).

Any ideas?

Hi, you tried FakePCIID? particularly FakePCIID.kext and FakePCIID_Intel_HD_Graphics.kext.

Also Lilu.kext and WhateverGreen.kext
 
Hi markoskz - I'm trying to set up my first Hackintosh, and my hardware is VERY close to yours:

Motherboard:GIGABYTE Z390 I AORUS PRO WiFi
https://www.amazon.com/gp/product/B07JBX52TM/?tag=tonymacx86com-20

RAM: Mushkin DDR4 – 2x8GB – 2133MHz , non-ECC
https://www.amazon.com/gp/product/B07CH15RH6/?tag=tonymacx86com-20

CPU: Intel Core i5-8400
https://www.amazon.com/gp/product/B0759FGJ3Q/?tag=tonymacx86com-20

SSD: WD Blue 3D NAND 1TB PC SSD
https://www.amazon.com/gp/product/B073SBQMCX/?tag=tonymacx86com-20

Graphics: Sapphire 11265-05-20G Radeon Pulse RX 580 8GB
https://www.amazon.com/gp/product/B06ZZ6FMF8/?tag=tonymacx86com-20

I have a few questions:
Will your EFI work with my different processor?
Other than putting in my own serial number(s), are there other changes I'll need to make to the EFI config?

Finally, I've heard all kinds of conflicting information about WiFi/BT on this board. It is clear that the built-in chip will not work, so I ordered this: BCM94352Z WIFI Card+BT4.0 (https://www.amazon.com/gp/product/B07BTR4YDN/?tag=tonymacx86com-20). I'm having a difficult time determining if: a) I can swap the built-in wifi card directly with this one, or b) this will need to use up one of the m.5 slots itself or c) this will use an m.5 slot *and* I'll still need to get another adapter for it.

You mentioned several pages back that you ordered a replacement WiFi/BT card - were you able to get that working? If so, exactly how?

Thank you!
 
Status
Not open for further replies.
Back
Top