Contribute
Register

[Success] PYNTy-Mac i7 8700 - Z390 I AORUS PRO WIFI - 16GB RAM - Sapphire RX 580 - Mojave 10.14.3

Status
Not open for further replies.
Hi, I have little problem. Audio not working :/ Any tips? Try MultiBeast? THX

Hi, You should review your "kext/Other" folder and have AppleALC.kext Version 1.3.4 or greater, since version 1.3.4, support was provided to ALC1220 layout-id 16 for Gigabyte Z390.

Download the latest version of AppleALC from the Releases page. Mount your EFI partition, and copy it to Clover/kexts/Other.

Edit the Inject key under Devices/Audio in your config.plist. I advise you to use the Clover Configurator. Replace 1 with the layout ID you wish to use. Look at the AppleALC wiki for the supported layout IDs for our codec Realtek® ALC1220.

I used 1, The audio works perfectly.

I hope I helped you! Greetings!
Mark
 
Thanks for your reply. Could you tell me about your boot time?
How about your boot time(Maybe called startup time)?
Thanks again.

Hi, from the Clover screen, exactly 15 seconds to the Apple logo, then 2 seconds to the start screen, I'm in total 17 seconds from clover.
 
After few days of use, I'm curious that is it the problem of hackintosh/Mojave that when my mouse hovering the options in dropdown menu, the hovered option will not be highlighted, and the submenu will not show as well.

e.g let say my mouse is hovering "Options", the sub menu will not show until I double click it.

Anyone has the same mouse hover problem as mine?
 
Anyone has the same mouse hover problem as mine?

Hi, I don't have that problem, I m thinking it might be the IGPU, you got it set up? The i7 9600k is not officially accommodating with Mac yet, even if it works out, perhaps the kexts of FakePCIID.kext and FakePCIID_Intel_HD_Graphics.kext may need to be required.

I made some changes to my config.plist and improved my igpu performance in i7 8700 (no K) in this week, in the system information I figure only the Rx 580, but if my igpu works, I could see him working with Final cut Pro, now I feel the system much more fluid, maybe I'm overreacting, but I think he s very stable.
 
This build is with a rx580, I think with IGPU HD630 the SMBIOS is 18.1 and change other values.
Hi! It will be my first Hackintosh build. Can you help me with change other values? I use same MB Z390i with F5d BIOS, 8700K, Samsung 970 EVO on the back M.2 port, BCM94360CS2 with converter on the front M.2 port NVMe (works on Windows, of course. I pulled out the Intel CNVI card).
But, I still cannot install. I already used your BIOS setting, EFI folder. Thanks.
 
Hi! It will be my first Hackintosh build. Can you help me with change other values? I use same MB Z390i with F5d BIOS, 8700K, Samsung 970 EVO on the back M.2 port, BCM94360CS2 with converter on the front M.2 port NVMe (works on Windows, of course. I pulled out the Intel CNVI card).
But, I still cannot install. I already used your BIOS setting, EFI folder. Thanks.

Hi, if of course, I'm happy to help. Tell me what mistake you're going to install.

My EFI folder, gone by changing so I can leave the system as stable as possible, and I've succeeded. At first, maybe it was different for the installation. I recommend you not plug the disk where you have Windows installed, just leave the SSD where you're going to install Mojave.

Tell me more about the mistake that appears to you. Greetings!
 
@markoskz
Huge thanks bro! Took me a while but got everything working (so far)! Thanks for that EFI! Cheers!
 
Hi! I have not yet tried. I don't have the adapter, yet, I bought it in China, and it will be arriving on March 6, approximately. When I get it, I'll will try it out, although I have seen in other post that does not work.

Hi , does it work? (BCM943602CS install in M.2(SSD) slot with adapter).
 
Hi , does it work? (BCM943602CS install in M.2(SSD) slot with adapter).

Hi, The adapter hasn't arrived yet. I made the order for this adapter, but you also need other adapter for sdd nvme slots. Because the M2 CNvi Wifi slot is not compatible.

It's two adapters together what you need to work, until another solution comes up. This is the second adapter, to achieve something like that:

71ER9OCQ6IL.jpg
 
Status
Not open for further replies.
Back
Top