Contribute
Register

New Intel NUC NUC8i7BEH compatibily

Status
Not open for further replies.
spicesha said:
[Success]

Hackintosh macOS Mojave 10.14.3 Build 18D42 at Intel NUC8i7BEH
Click to expand...
Excellent - is there any way you share your clover etc settings (I have been trying with High Sierra), but limited success.

Would be much appreciated.
 
Iightphos said:
but BT not working - also I has sound from the jack working but now its gone.
Click to expand...

to use BT you have to boot in to windows and connect to an device. So reboot to osx and your BT is working. That is actually the only way i know. The Efi-folder is quite old. May you can test this one. There is the ID28 injected and your sound should be fine.
 

Attachments

  • CLOVER-NUC8I7BEH-03-03-2019.zip
    3.1 MB · Views: 220
Many
Vanessag said:
to use BT you have to boot in to windows and connect to an device. So reboot to osx and your BT is working. That is actually the only way i know. The Efi-folder is quite old. May you can test this one. There is the ID28 injected and your sound should be fine.
Click to expand...
Many thanks. I'm new to Hackintosh so don't know what ID28 is. I have installed High Sierra from Time machine. Do I need to put anything in /Library/E and kextcache -i / stuff like that?

Thanks for your help.
 
Vanessag said:
to use BT you have to boot in to windows and connect to an device. So reboot to osx and your BT is working. That is actually the only way i know. The Efi-folder is quite old. May you can test this one. There is the ID28 injected and your sound should be fine.
Click to expand...
Ok I tried the clover file above basically just copied the whole folder as it is to EFI. Changed the SMBIOS (added ids), and also copied (the kexts only) to /L/E and ran kextcache -i /.

However now I can no longer boot the Mac SSD - not even safe mode - all I get is a blank screen a cursor and shutdown.

I have NUC8i7BEH3 running High Sierra. Maybe the file is not suitable for HS and perhaps it is for Mojave.
 
Last edited:
Is there anyway to change the EFI partition from clover boot?
 
Hey All,
i got mine (NUC8i7BEH, the label on the bottom says BOXNUC8i7BEH2) today, but I can't get ethernet to work with IntelMausi...
I have a USB adapter which works but the OnBoard LAN doesn't show up (MAC:94-C6-91-AA-9B-DF).

Did you guys get 4k working at 60Hz with HDMI?
 

Attachments

  • IntelMausiEthernet.kext.zip
    56.2 KB · Views: 211

Attachments

  • Screenshot 2019-03-14 at 23.56.17.png
    Screenshot 2019-03-14 at 23.56.17.png
    226.1 KB · Views: 369
  • EFI_NUC8i7BEH_20190315.zip
    20.5 MB · Views: 271
Last edited:
suedkaliber said:
Hi,
Yes ;)

But that doesn't help regarding ethernet.

The driver fails with "Failed to get adapter data with error -3."

As @Mieze stated, I enabled FixRegions in my Clover config and it worked immediately!
Currently working EFI attached.

Not Working:
Thunderbolt3: 4k, 60Hz works only. None of my TB3 gear like CalDigit TS3 Dock works (except the Display)
Click to expand...
Hi I have the same specs as you, but am running 10.13.3 High Sierra. Following the NUC8 guides I had the following in /Library/Extensions with SMBIOS set to iMac16.2:

However a few problems, flicker in browsers and some Apps, booting problems sometimes getting no entry sign:


This is in /L/E

drwxr-xr-x@ 3 root wheel 96 16 Mar 12:59 BrcmFirmwareRepo.kext


drwxr-xr-x@ 3 root wheel 96 16 Mar 12:59 CodecCommander.kext


drwxr-xr-x@ 3 root wheel 96 16 Mar 12:59 FakeSMC.kext


drwxr-xr-x@ 3 root wheel 96 16 Mar 12:59 IntelMausiEthernet.kext


drwxr-xr-x@ 3 root wheel 96 16 Mar 12:59 NullEthernet.kext


drwxr-xr-x@ 3 root wheel 96 16 Mar 12:59 USBInjectAll.kext


drwxr-xr-x@ 3 root wheel 96 16 Mar 12:59 AirportBrcmFixup.kext


drwxr-xr-x@ 3 root wheel 96 16 Mar 12:59 AppleALC.kext


drwxr-xr-x@ 3 root wheel 96 16 Mar 12:59 BT4LEContiunityFixup.kext


drwxr-xr-x@ 3 root wheel 96 16 Mar 12:59 Lilu.kext


drwxr-xr-x@ 3 root wheel 96 16 Mar 12:59 WhateverGreen.kext


drwxr-xr-x@ 3 root wheel 96 16 Mar 12:59 BrcmPatchRAM2.kext


drwxr-xr-x@ 3 root wheel 96 16 Mar 12:59 BrcmNonPatchRAM2.kext


drwxr-xr-x@ 3 root wheel 96 16 Mar 12:59 FakePCIID.kext


drwxr-xr-x@ 3 root wheel 96 16 Mar 12:59 FakePCIID_Intel_HDMI_Audio.kext


drwxr-xr-x@ 3 root wheel 96 16 Mar 12:59 XHCI-unsupported.kext


drwxr-xr-x@ 3 root wheel 96 16 Mar 12:59 SATA-unsupported.kext


drwxr-xr-x@ 3 root wheel 96 16 Mar 13:00 LiluFriend.kext




Grateful for any help.

Take care
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top