- Joined
- Jul 25, 2013
- Messages
- 17
- Motherboard
- ASUS Z170-P
- CPU
- i7-6700
- Graphics
- GTX 970
- Mobile Phone
Can i post my full DSDT Extracted folder(origin) ?can't do much without all your files....
Can i post my full DSDT Extracted folder(origin) ?can't do much without all your files....
Here is my Clover Extracted Origin folder, Please help me out Skip those errors.can't do much without all your files....
Here is my Clover Extracted Origin folder, Please help me out Skip those errors.
Fixed as u said already using ACPI 6.1 but I cannot fix the $end of premature file error, Please help me fix it . Please look at the .dsl attached in the post 3,095The error you have is covered in post #1.
Please read it carefully.
My approach is to apply the patches as they are listed here. Mr. RehabMan always says "Read the guide very carefully. Again!". So I ended up following every word as written.In the "Common Patches" section, does the patching order matters? For example, are the results of patching Patch A and then Patch B the same as those of patching Patch B and then Patch A?
Decompile your DSDT and SSDTs with iasl -da -dl DSDT.aml SSDT-*.amlFixed as u said already using ACPI 6.1 but I cannot fix the $end of premature file error, Please help me fix it . Please look at the .dsl attached in the post 3,095
If (LEqual (PM6H, One))
{
CreateBitField (BUF0, \_SB.PCI0._Y0C._RW, ECRW) // _RW_: Read-Write Status
Store (Zero, ECRW (If (PM0H)
{
CreateDWordField (BUF0, \_SB.PCI0._Y0D._LEN, F0LN) // _LEN: Length
Store (Zero, F0LN)
}))
}
If (LEqual (PM6H, One))
{
CreateBitField (BUF0, \_SB.PCI0._Y0C._RW, ECRW) // _RW_: Read-Write Status
Store (Zero, ECRW) If (PM0H)
{
CreateDWordField (BUF0, \_SB.PCI0._Y0D._LEN, F0LN) // _LEN: Length
Store (Zero, F0LN)
}
}
Method (ADBG, 1, Serialized)
{
If (CondRefOf (MDBG))
{
Return (MDBG)
Arg0
}
Return (Zero)
}
Method (ADBG, 1, Serialized)
{
If (CondRefOf (MDBG))
{
Store (Arg0, MDBG)
Return
}
Return (Zero)
}
Yea , i have fixed the first two errors but I can’t able to fix the last one, now am clear and will try once i get home, thank you so much for your help !!!Decompile your DSDT and SSDTs with iasl -da -dl DSDT.aml SSDT-*.aml
View attachment 390951
That is the fix for the first two errors:
Before:
After:Code:If (LEqual (PM6H, One)) { CreateBitField (BUF0, \_SB.PCI0._Y0C._RW, ECRW) // _RW_: Read-Write Status Store (Zero, ECRW (If (PM0H) { CreateDWordField (BUF0, \_SB.PCI0._Y0D._LEN, F0LN) // _LEN: Length Store (Zero, F0LN) })) }
Code:If (LEqual (PM6H, One)) { CreateBitField (BUF0, \_SB.PCI0._Y0C._RW, ECRW) // _RW_: Read-Write Status Store (Zero, ECRW) If (PM0H) { CreateDWordField (BUF0, \_SB.PCI0._Y0D._LEN, F0LN) // _LEN: Length Store (Zero, F0LN) } }
Then you have to fix the last error:
View attachment 390952
From:
Code:Method (ADBG, 1, Serialized) { If (CondRefOf (MDBG)) { Return (MDBG) Arg0 } Return (Zero) }
To:
Code:Method (ADBG, 1, Serialized) { If (CondRefOf (MDBG)) { Store (Arg0, MDBG) Return } Return (Zero) }
Result:
View attachment 390954
As you can see your errors are described in post #1.
Please read carefully.
Whoooo !!! Yeahhh !!! it worked, Thank you so much. AppreciatedDecompile your DSDT and SSDTs with iasl -da -dl DSDT.aml SSDT-*.aml
View attachment 390951
That is the fix for the first two errors:
Before:
After:Code:If (LEqual (PM6H, One)) { CreateBitField (BUF0, \_SB.PCI0._Y0C._RW, ECRW) // _RW_: Read-Write Status Store (Zero, ECRW (If (PM0H) { CreateDWordField (BUF0, \_SB.PCI0._Y0D._LEN, F0LN) // _LEN: Length Store (Zero, F0LN) })) }
Code:If (LEqual (PM6H, One)) { CreateBitField (BUF0, \_SB.PCI0._Y0C._RW, ECRW) // _RW_: Read-Write Status Store (Zero, ECRW) If (PM0H) { CreateDWordField (BUF0, \_SB.PCI0._Y0D._LEN, F0LN) // _LEN: Length Store (Zero, F0LN) } }
Then you have to fix the last error:
View attachment 390952
From:
Code:Method (ADBG, 1, Serialized) { If (CondRefOf (MDBG)) { Return (MDBG) Arg0 } Return (Zero) }
To:
Code:Method (ADBG, 1, Serialized) { If (CondRefOf (MDBG)) { Store (Arg0, MDBG) Return } Return (Zero) }
Result:
View attachment 390954
As you can see your errors are described in post #1.
Please read carefully.
Fixed as u said already using ACPI 6.1 but I cannot fix the $end of premature file error, Please help me fix it . Please look at the .dsl attached in the post 3,095
Yeah, Looked into it !! Made the Right Correction and now it's finePost #3095 .dsl has incorrect/failed patches applied.
Check for error free compilation after each edit.