Contribute
Register

macOS Mojave on HP 17-x102nl

Status
Not open for further replies.
Joined
Oct 1, 2013
Messages
375
Motherboard
Laptop make & model # > See Rules!
CPU
i5 > Need model # > See Rules!
Graphics
GT 820M
Mac
  1. iMac
Mobile Phone
  1. Android
Hello everyone,
I'm trying to install macOS Mojave on HP 17-x102nl:

CPU: Intel Core i7-7500U
iGPU: Intel HD620 - 1600x900
dGPU: AMD Radeon R7 M440 (discrete)

I created usb, but when it comes to boot, after completing the progress bar, it shows a whole black screen (instead of language selection screen). Tried USB 2 and 3 with no luck.
I thought it's something related to AMD card, so I tried to disable it temporarily through clover (unchecking Inject ATI), but maybe it wasn't the right solution.
Now I think it's related to the fact it uses HD620 (I previously tried this same Clover configuration on an 8th gen i5 laptop, UHD620, with success), but it's just speculation.
 

Attachments

  • CLOVER.zip
    4.1 MB · Views: 64
Hello everyone,
I'm trying to install macOS Mojave on HP 17-x102nl:

CPU: Intel Core i7-7500U
iGPU: Intel HD620 - 1600x900
dGPU: AMD Radeon R7 M440 (discrete)

I created usb, but when it comes to boot, after completing the progress bar, it shows a whole black screen (instead of language selection screen). Tried USB 2 and 3 with no luck.
I thought it's something related to AMD card, so I tried to disable it temporarily through clover (unchecking Inject ATI), but maybe it wasn't the right solution.
Now I think it's related to the fact it uses HD620 (I previously tried this same Clover configuration on an 8th gen i5 laptop, UHD620, with success), but it's just speculation.
i have given you your own thread
 
Thank you. Any help?
injecting ATI is part of the config.plist, the way Rehabman makes it work

are your bios settings correct? can you enable CSM?
 
injecting ATI is part of the config.plist, the way Rehabman makes it work

are your bios settings correct? can you enable CSM?

Not yet. Let me update BIOS and I'll be able to tell you something more.
 
Hello everyone,
I'm trying to install macOS Mojave on HP 17-x102nl:

CPU: Intel Core i7-7500U
iGPU: Intel HD620 - 1600x900
dGPU: AMD Radeon R7 M440 (discrete)

I created usb, but when it comes to boot, after completing the progress bar, it shows a whole black screen (instead of language selection screen). Tried USB 2 and 3 with no luck.
I thought it's something related to AMD card, so I tried to disable it temporarily through clover (unchecking Inject ATI), but maybe it wasn't the right solution.
Now I think it's related to the fact it uses HD620 (I previously tried this same Clover configuration on an 8th gen i5 laptop, UHD620, with success), but it's just speculation.

Try with invalid ig-platform-id (0x12345678).
 
Hello again, sorry for the delay. This BIOS update took very long.

So,
injecting ATI is part of the config.plist, the way Rehabman makes it work

are your bios settings correct? can you enable CSM?

I checked in BIOS. No CSM related options...
EDIT: also with legacy boot option enable, it doesn’t boot.

Try with invalid ig-platform-id (0x12345678).
Also tried but no success...

Any suggestion?
 
Ok, I reached the installer and now I can see a verbose log.
After this it stops and doesn't go on.
I can't figure out what's going on. I also tried disabling ApplePS2Controller, but no success.
Immagine.jpeg

Any help? Thank you in advance.
 
Hello folks, finally got to reach the installer.
Last screenshot I uploaded was solved enabling "Rename EC0 to EC" in clover config, just FYI. Then I set platform-id to 12345678 and it went, but now I don't have QE/CI and I don't know how to get them. Any hints?
 
Hello folks, finally got to reach the installer.
Last screenshot I uploaded was solved enabling "Rename EC0 to EC" in clover config, just FYI. Then I set platform-id to 12345678 and it went, but now I don't have QE/CI and I don't know how to get them. Any hints?
use a valid Platform-ID
 
Status
Not open for further replies.
Back
Top