- Joined
- Nov 8, 2015
- Messages
- 23
- Motherboard
- ASUS ROG STRIX Z370 G GAMING (WI-FI AC)
- CPU
- i7-8700K
- Graphics
- RX 580
- Mac
- Classic Mac
- Mobile Phone
Hi,
Mojave 10.14.1 and then 10.14.2 was running well on my Asus ROG Strix Z370-G Gaming (Wi-Fi AC). I downloaded and installed the 10.14.3 cumulative update (incorporating the latest supplemental update as well). I guess it was my mistake - not to unplug the 5 internal SATA drives -, because after the update completed my machine could not reboot, only using a flash drive (created with unibeast, containing the EFI downloaded from this post).
I could not resolve this so after half a day I decided to build a new USB using the latest UniBeast, and the latest macOS 10.14.3 and the latest EFI (4.5.2 posted on Feb.2. by PastryChef), latest Clover. After the fresh new install (unpluging all HHDs, erasing, re-formating the NVMe SSD)... macOS 10.14.3 runs perfectly (no need for pendrive to boot) - so the boot part is eventually [Solved].
Unfortunately, none of the "blue" USB 3 ports are working (not the front (internal) not on the MB/at the back). The "red" USB 3.1 and the "black" USB 2 ports are working fine (and if I plug the mouse of the keyboard to the "blue" port > those work as well, but not any USB3 devices are recognized.
I am not a "port-mapping" guru, so I used the (previous) EFI attached to this post - which was working perfectly - till 10.14.2. I also tried with all the (previous) "EFI"s that PastryChef shared in the post but unfortunately none of these made the USB 3 ports work.
Luckily this is not a "killer-issue", yet, please suggest if you have anything in mind to make the "blue" USB 3 ports working! many thanks!
Mojave 10.14.1 and then 10.14.2 was running well on my Asus ROG Strix Z370-G Gaming (Wi-Fi AC). I downloaded and installed the 10.14.3 cumulative update (incorporating the latest supplemental update as well). I guess it was my mistake - not to unplug the 5 internal SATA drives -, because after the update completed my machine could not reboot, only using a flash drive (created with unibeast, containing the EFI downloaded from this post).
I could not resolve this so after half a day I decided to build a new USB using the latest UniBeast, and the latest macOS 10.14.3 and the latest EFI (4.5.2 posted on Feb.2. by PastryChef), latest Clover. After the fresh new install (unpluging all HHDs, erasing, re-formating the NVMe SSD)... macOS 10.14.3 runs perfectly (no need for pendrive to boot) - so the boot part is eventually [Solved].
Unfortunately, none of the "blue" USB 3 ports are working (not the front (internal) not on the MB/at the back). The "red" USB 3.1 and the "black" USB 2 ports are working fine (and if I plug the mouse of the keyboard to the "blue" port > those work as well, but not any USB3 devices are recognized.
I am not a "port-mapping" guru, so I used the (previous) EFI attached to this post - which was working perfectly - till 10.14.2. I also tried with all the (previous) "EFI"s that PastryChef shared in the post but unfortunately none of these made the USB 3 ports work.
Luckily this is not a "killer-issue", yet, please suggest if you have anything in mind to make the "blue" USB 3 ports working! many thanks!