Trying to install high sierra gets a circle with a cross over high sierra

[calleo]

zip and upload your clover folder

Here it's

 

[jorsh]

I'm not an expert but your drivers64UEFI folder is empty. I am not sure it should be like that even for your install drive.

Edit: nevermind, it was showing empty on my end for some reason

 

[calleo]

I'm not an expert but your drivers64UEFI folder is empty. I am not sure it should be like that even for your install drive.

Edit: nevermind, it was showing empty on my end for some reason

Alright. I have no idea what to do now more then many do try this patch

macOS 10.13.4 Update

New patch needed: KextsToPatch Comment USB 10.13.4+ by PMHeart Disabled Find g32UDw+DlwQAAA== InfoPlistPatch...

www.tonymacx86.com

Do you think this would work? If it does how do I use it?

 

[jorsh]

I'd double check your BIOS settings before applying other patches. Maybe try following this guy's settings. It's your same motherboard model:

[Solved] ASUS Z170-A High Sierra

Hello Guys, I've recently replace my Gigabyte Z170X-Gaming damaged motherboard with an ASUS Z170-A This is my new System situation: ASUS Z170-A Intel Core i7-6700K Intel HD Graphics 530 (NVIDIA GeForce GTX 960 4095 MB) not yet installed RAM: 32 GB 512GB SSD 850 EVO Samsung BIOS Setup Ai...

www.tonymacx86.com

 

[TheAngryYeti]

i too am having the same issue(s).

would love help!

-Sin

 

[calleo]

I'd double check your BIOS settings before applying other patches. Maybe try following this guy's settings. It's your same motherboard model:

[Solved] ASUS Z170-A High Sierra

Hello Guys, I've recently replace my Gigabyte Z170X-Gaming damaged motherboard with an ASUS Z170-A This is my new System situation: ASUS Z170-A Intel Core i7-6700K Intel HD Graphics 530 (NVIDIA GeForce GTX 960 4095 MB) not yet installed RAM: 32 GB 512GB SSD 850 EVO Samsung BIOS Setup Ai...

www.tonymacx86.com

I have double checked my bios and I changed my it as the guide, but i'm still stuck at the same place.

 

[jpz4085]

i too am having the same issue(s).

would love help!

-Sin

I have double checked my bios and I changed my it as the guide, but i'm still stuck at the same place.

It might be worth making a new install USB using the createinstallmedia method and downloading the current version of Clover and USBInjectAll.kext since both contained in calleo's folder are fairly old. I'd at least try the later two. You can try using the exclude flags with USBInjectAll and test every port.

 

[calleo]

It might be worth making a new install USB using the createinstallmedia method and downloading the current version of Clover and USBInjectAll.kext since both contained in calleo's folder are fairly old. I'd at least try the later two. You can try using the exclude flags with USBInjectAll and test every port.

I dis what you said and followed the guide. Installed UEFI drivers only with apfs drivers in clover.
Now I get this.

 

[P1LGRIM]

Now I get this.

May be missing memory fix driver.
Suggest Use AptioMemoryFix-64.efi (in /EFI/CLOVER/drivers64UEFI/)
Make sure that you remove any OsxAptioFixDrv, OsxAptioFix2Drv, OsxAptioFix3Drv.

 

[calleo]

May be missing memory fix driver.
Suggest Use AptioMemoryFix-64.efi (in /EFI/CLOVER/drivers64UEFI/)
Make sure that you remove any OsxAptioFixDrv, OsxAptioFix2Drv, OsxAptioFix3Drv.

Can i reistall clover on the USB stick or do I need erase everything on the usb stick and start all over?