No Audio Devices - AppleHDA Realtek Audio

[toleda]

had an issue, after Uninstalling AppleHDA Realtek Audio, updating Clover that required me to pull the boot drive

Where does it say to update Clover or pull a boot drive?

 

[toleda]

Extracted Vanilla AppleHDA from update 10.14.3

Not vanilla, 500 KB missing/Resources should have 91 files, 1 file in the attached
Update only contains the files changed. Mojave installer is the only way to get native AppleHDA.kext
See Post #1701

 

[jaminwang2386]

Hi,
I'm having issues regarding to using microphone on build in inputs. I want to use apple earphone mic as input in logic pro and I have set both in mac and logic pro to use built in inputs and outputs.

I connect microphone and headphone input from the motherboard using audio splitter (so basically i want to use apple earphone as both input and output to record and listen) but that seem to not work. What am i doing wrong. The apple earphone definitely has no problem because i tried to record with it using my iphone voice memo. It works fine.

I have attached the splitter that i use to connect headphone and mic below.

 

[petrikleynhans]

Not vanilla, 500 KB missing/Resources should have 91 files, 1 file in the attached
Update only contains the files changed. Mojave installer is the only way to get native AppleHDA.kext
See Post #1701

Hey Toleda,

Pulled correct one from Mojave installer. Still no luck. Please find attached new files.

 

[toleda]

want to use apple earphone as both input and output to record and listen

macOS, not native
Search LineIn or see Rogue Amoeba | What can we help you find?

 

[toleda]

Still no luck

AppleALC does not work on your system. Suggestions:

1. Run Mojave installer over current Mojave installation
2. Create a new blank 25 GB partition and install a clean copy of Mojave

See Mojave AppleHDA Audio and reply with new files

 

[silvershark]

1. No onboard Audio Detected.
2. High Sierra 10.3.16 with 2019-001 Security Update (Sound worked prior to this).
3. I tried the following guide, but it never worked. https://www.tonymacx86.com/threads/high-sierra-multibeast-audio.246618/
4. This is what worked for me Prior to Security Update… https://www.tonymacx86.com/threads/success-asus-z87-a-i5-4670k-gtx-760.134740/. AppleHDA.kext and HDAEnabler.kext. If I apply these now after update it sends my hackintosh into a reboot loop.

Disregard, I copied them again and sound is working again!

 

[petrikleynhans]

AppleALC does not work on your system. Suggestions:

1. Run Mojave installer over current Mojave installation
2. Create a new blank 25 GB partition and install a clean copy of Mojave

See Mojave AppleHDA Audio and reply with new files

Thanks Toleda,

I ran the Mojave installer over my current installation, so now I'm back at 13.14.0

I read through the AppleHDA Audio post, and tried the MultiBeast option. Still no devices visible.

Please find attached files. I also included screengrabs of my L/E folder, EFI kext folder if it helps.

PS Sidenote. Previously I managed to get onboard audio working using VoodooHDA. I don't know if that helps in any way, just thought maybe it could point us in the right direction.

Many thanks.

 

[jaminwang2386]

macOS, not native
Search LineIn or see Rogue Amoeba | What can we help you find?

I have tried setting to Build-in inputs and Build-In Line Output: Line Out for on both SOUNDSOURCE and Logic Pro X.The apple microphone still does not record. I have tried plugging in build-in microphone port (green port) and Line In port on Z370 Asrock Extreme 4. Microphone does not record. I tried using splitters and setting it all to build in inputs and outputs I can hear audio through apple earphone but not record simultaneously... What am i doing wrong. Or is it not possible to do what i want to do?

Here's how i did this:
Splitter plugged into rear microphone port (pink) and front speaker (lime). Then i plugged 2 meter 3.5 auxilary extender to the splitter. Then apple earphone to the extender.

Splitter --> Extender --> Apple Earphone

My splitter:

https://www.lazada.co.th/products/ugreen-10790-headphone-splitter-for-computer-35mm-female-to-2-dual-35mm-male-headphone-mic-audio-y-splitter-cable-smartphone-headset-to-pc-adapter-or-smartphones-tablets-media-players-20cm-i270884587-s424533108.html?gclid=CjwKCAiAy-_iBRAaEiwAYhSlAxbPbI9BFQLU_Fp1pMDOaysM8uKwvyqMN0Jf-sfzY63GmuskSp6vLBoCHqQQAvD_BwE&s_kwcid=AL!3152!3!286179630377!!!u!!&exlaz=d_1:mm_150050845_51350205_2010350205::12:1498579383!58089999096!!!pla-296303633664!c!296303633664!424533108!120266685&ef_id=W7oIaQAAAINjh3OI:20190207170804:s

Extender:

https://www.lazada.co.th/-i257906566-s397554799.html?urlFlag=true&mp=1

 

[AndreV]

Hi,

My setup consist of:
Motherboard :Gigabyte Z370N WIFI Bios version F2
CPU. : Intel i7-8700K
Graphics : Build in UHD630
MacOS version: 10.14.3 (18D42)

I had a big struggle with switching from GTX 1050i to build-in UHD630 but I finally managed to get it up and running. Now I'm facing the challenge to get audio (Realtek 1220 on motherboard) working after moving to Mojave. I tried several paths and fixes but I'm now completely out of options and idea's after 4 nights of trying.

Can you give me a direction?

Thanks in advance!