macOS 10.14.3 Update

[han000ka]

I had one little problem using the standard Software Update.

I boot from a M2 SSD and use a second internal HD as the home directory of my main user, after starting the upgrade on the first reboot, my computer showed up a screen telling MacOS could not be installed in this computer because some components were missing, I restarted the machine disconnecting the internal HD and after that everything went smoothly.

 

[jrw85705]

Everything went smoothly.

 

[Macway44]

Updated with System Preferences without any problem

 

[Mondragor]

Hey guys had an issue with Audio and old Gigabyte Z87M-D3H (ALC892). Audio was via Lili and Apple ALC in Clover local Kext Folders. After update no audio but HDMI. Was quite surprised and played around. All I changed was "Inject Audio" in Configurator/Devices. Changed from "1" to "No" and back to "1". Restarted each set. Now it works. Crazy ****.

Now 10.14.3 runs like a charm.

 

[mattus]

Updated with no issues via Apples Software Update. A couple of reboots and presto!

 

[the509man]

All is GOOD!

 

[najeeb_anwer]

Updated without any problems.

 

[zzmadd]

The Installation went well, BUT rendering times in Final Cut Pro X (and Metal aware apps) became zombie after update.

I'm testing the exact same EFI and config.plis booting on 10.14.2 and 10.14.3 and BruceX test that takes 55sec on 10.14.2 on the very exact system and EFI takes 7 minutes on 10.14.3.

I tested this with 2 of my systems that are using iGPU and they both show the same problem.
Can anyone confirm?
Beware of the performance drop.

 

[MustafaMESSI]

Updated successfully from the software updater without any bugs, here is the steps for mine :

1- first I downloaded the update from System Preferences --> Software Update.
2- after restart I changed the graphics platform-id to 12345678 to boot successfully.
3- the installation reboot twice.
4- after finish the installation, I boot to the system with graphics platform-id to 12345678.
5- then I used the terminal to rebuild kexts cache, with this command :
sudo kextcache -I /
6- then I rebooted the system and everything is well but I noticed that the system serial number and my config for glover restored to default, so I already have the backup for my config.plist, so I restore it using efi mounter.

 

[osufella]

Updated to latest clover build via clover configurator. Updated kexts. Updated via System Preferences. Rebooted 2x. 17 minutes later, up and working.