Contribute
Register

Broadcom WiFi/Bluetooth [Guide]

Hi, I've installed mojave (multibeast, clover) and can't get the BCM94352Z working with the method at the top of this thread... Is it cause of mojave? (noticed at the bottom "don't support 10.14")
I've installed the kexts according to instructions (kextbeast), checked no double BrcmFirmware or BrcmPatch, all seems to be installed ok, but no go... if it's a mojave problem, does anybody know are there updated kexts available?
Thanks..!
**addition: does the kext files should be in the EFI/Clover/kexts/Other folder as well? or only in the Library/Extentions ?

really appreciate the help... i've been trying to get to work since yesterday..
 
Hello. I'm start using Fenvi FV-T919 (DCPI List - BCM43602). Everything was working out of box, BUT! Have an issue with 5ghz network - system don't take password. My router has 2 networks(separated by names) on 1 password - and 2.4 network works. Tried to add AirportBrcmFixup.kext, Lilu and all what whey need but still no go, maybe become even worse. What can be issue? My Hack is OSX 10.13.6, iMac14.2, Clover 4844 (only kexts and audio patch by Toleda),asus p8b75-v, i7-2600, GTX750 (Nvidia web drivers), Fenvi FV-T919 (inserted in pci-e half port).
 
Hello. I'm start using Fenvi FV-T919 (DCPI List - BCM43602). Everything was working out of box, BUT! Have an issue with 5ghz network - system don't take password. My router has 2 networks(separated by names) on 1 password - and 2.4 network works. Tried to add AirportBrcmFixup.kext, Lilu and all what whey need but still no go, maybe become even worse. What can be issue? My Hack is OSX 10.13.6, iMac14.2, Clover 4844 (only kexts and audio patch by Toleda),asus p8b75-v, i7-2600, GTX750 (Nvidia web drivers), Fenvi FV-T919 (inserted in pci-e half port).
Sorry, question answered allready. The answer was - need to be installed in pci-e normal size port, not a half port
 
Yes
Where did you install the BCM94352Z?
No files attached
See Post #1/IV. Problem Reporting; attach all requested files
Hi Toleda, first tnx for the help... I've attached the files this time...
I've installed the kexts first only in Lib/Ext then when it didn't work tried again in Sys/Lib/Ext.
I've used this guide:https://www.tonymacx86.com/threads/...gabyte-z390-i-aorus-pro-wifi-i9-9900k.267897/
But used the clover configuration (only) from here:
(https://)www.******.com/r/hackintosh/comments/68p1e2/ramblings_of_a_hackintosher_a_sorta_brief_vanilla/
it just seemed more detailed...
I used the intel card at the beginning and got BT but couldn't connect nothing, then changed to the Broadcom BCM94352Z (advice from a friend). Now I get nothing after trying only with your guide.
I'm on Mojave 10.14.2, Gigabyte Z390I pro wifi, Intel i7 9700k, OnBoard graphics.
* No Wifi edited on dsdt or ssdt
** Inject only essential kexts and then injected the rest with kextbeast
Really hope you can help.. And tnx again man!
 

Attachments

  • 4Toleda (blank).zip
    1.1 MB · Views: 64
I used the intel card at the beginning and got BT but couldn't connect nothing, then changed to the Broadcom BCM94352Z
Not helpful, ignored the Post #667 question.
2nd request, where did you install the BCM94352Z?
 
Not helpful, ignored the Post #667 question.
2nd request, where did you install the BCM94352Z?
I didn't ignore it, I said I've installed it in Library/Extentions, If you mean like where is it assembled so physically I've assembled it instead of the default intel card... Other then that, sorry but Idk about any other kind of installation so I got no further info...
 
I've assembled it instead of the default intel card
Fail, no kext fixes a hardware problem
M.2 Broadcom does not work in Gigabyte M.2 Intel/CNVi
Choices:
1. PCIe/M.2 KeyA+E adapter + USB
2. Other motherboard M.2/M.2 KeyM to M.2 KeyA+E adapter
 
Fail, no kext fixes a hardware problem
M.2 Broadcom does not work in Gigabyte M.2 Intel/CNVi
Choices:
1. PCIe/M.2 KeyA+E adapter + USB
2. Other motherboard M.2/M.2 KeyM to M.2 KeyA+E adapter
Got it, tnx!
I've ordered a M.2/PCIe adapter, what do you mean by "+ USB?" a wifi usb dongle?
Also, after i'll connect the broadcom via the adapter should I do any further installations or the kext i have now should do it?
 
Last edited:
Back
Top