Contribute
Register

Broadcom WiFi/Bluetooth [Guide]

Nice work! I have to say, I don't miss a day with an ethernet cable (but I love them anyway:mrgreen:) and a poor usb bluetooth connection!

Please fell free to make one, I'm finishing some projects so my time is short!

I'm planning to research about a m2mkey-Pcie adaptor to get somehow a firewire connector. Would be amazing to have in a miniITX build a GPU, this Wifi/BLE card and a firewire pcie!!!:lol:

well that's for later anyway, nice to hear the good news!
Cheers, Kevin.
Question, my build started to have some issues at shutdown/restart
it takes for ever, just wondering if you developed the same issue running latest 10.13.6 since I have your same buil
 
Last edited:
Anyone have any luck with the Fenvi T919 on Gigabyte Z370 boards using High Sierra (10.13.6)?
No luck required. It's supported OOB in High Sierra. Your macOS install must be configured correctly, especially USB, for the BT to work properly. If it's not the BT may not work.
 
No luck required. It's supported OOB in High Sierra. Your macOS install must be configured correctly, especially USB, for the BT to work properly. If it's not the BT may not work.
Appreciate the reply! All the USB ports are working at last check, with the card plugged into the correct USB port on the mother board for the Bluetooth. Is there any information I can provide about my build where we could see what I missed?
 
Appreciate the reply! All the USB ports are working at last check, with the card plugged into the correct USB port on the mother board for the Bluetooth. Is there any information I can provide about my build where we could see what I missed?
Try connecting the front USB ports to the USB 2.0 header that your Wifi BT card is connected to and then test them out. Does the Wifi work at all ?
 
Question, my build started to have some issues at shutdown/restart
it takes for ever, just wondering if you developed the same issue running latest 10.13.6 since I have your same buil
Try my DSDT and SSDT-UIAC attached :)
 

Attachments

  • DSDT_SSDTUIAC_h370nwifi.zip
    40.7 KB · Views: 76
I'm using a BCM94352Z DW1560 and have noticed when I use the boot argument brcmfx-country=GB my wifi speeds drop to 400Mbps however, omitting it and booting with the default (US) I'm able to achieve speeds of 867Mbps (as expected). Is there anyway I can get the correct country code to have full speed as well?
 
Try my DSDT and SSDT-UIAC attached :)
Thanks, way better now :thumbup:
are you running Mojave or still on high Sierra ?
I just upgraded to Mojave. Everything seems to be smooth, only sleep/wake issues.
Can you share your EFI folder to take a look at it
 
Back
Top