- Joined
- Dec 27, 2018
- Messages
- 3
- Motherboard
- ASRock Z370 Pro4
- CPU
- i7-8700K
- Graphics
- GTX 1080 Ti
Windows 10 Home 64-bit
Intel Core i7-8700K @ 3.70 Ghz
2x16GB G. Skill Ripjaws DDR4-3200 Mhz
ASrock Z370 Pro4
4GB MSI NVIDIA Geforce GTX 1080 Ti
4TB Seagate HDD (For backup and low usage games)
250GB SATA Toshiba SSD (Windows)
500GB M.2 Samsung 970 EVO (For MAC)
So I've mostly followed the instructions from this thread:
https://www.tonymacx86.com/threads/...VZcRaVjaDDODzxbaS0EZNOlVxK4iXY5bcE70Xp7dg2PMU
I created the bootable drive with UniBeast and moved MultiBeast over to the drive. Removed all extra hard drives, placed the drive in a USB 2.0 slot and set my bios settings as shown:
In Advanced / USB Configuration:XHCI Handoff: enabled
In Advanced / Chipset Configuration: Primary Graphics Adapter: PCI Express VT-d: Disabled
In Advanced / Super IO Configuration: Serial Port: Disabled
In Security: Secure Boot: Disabled In Boot: Fast Boot: Disabled
CSM(Compatibility Support Module): Disabled
I've taken these option from a success thread on an older ASrock motherboard as I can't find exact settings for my BIOS
Here is the problem: I get to the clover screen and when I try to 'Boot macOS Install from Install macOS High Sierra' my computer just reboots. I've have also tried some boot options like Safe Mode and others. Does anyone have a clue how I can get this running?
Intel Core i7-8700K @ 3.70 Ghz
2x16GB G. Skill Ripjaws DDR4-3200 Mhz
ASrock Z370 Pro4
4GB MSI NVIDIA Geforce GTX 1080 Ti
4TB Seagate HDD (For backup and low usage games)
250GB SATA Toshiba SSD (Windows)
500GB M.2 Samsung 970 EVO (For MAC)
So I've mostly followed the instructions from this thread:
https://www.tonymacx86.com/threads/...VZcRaVjaDDODzxbaS0EZNOlVxK4iXY5bcE70Xp7dg2PMU
I created the bootable drive with UniBeast and moved MultiBeast over to the drive. Removed all extra hard drives, placed the drive in a USB 2.0 slot and set my bios settings as shown:
In Advanced / USB Configuration:XHCI Handoff: enabled
In Advanced / Chipset Configuration: Primary Graphics Adapter: PCI Express VT-d: Disabled
In Advanced / Super IO Configuration: Serial Port: Disabled
In Security: Secure Boot: Disabled In Boot: Fast Boot: Disabled
CSM(Compatibility Support Module): Disabled
I've taken these option from a success thread on an older ASrock motherboard as I can't find exact settings for my BIOS
Here is the problem: I get to the clover screen and when I try to 'Boot macOS Install from Install macOS High Sierra' my computer just reboots. I've have also tried some boot options like Safe Mode and others. Does anyone have a clue how I can get this running?