Contribute
Register

UniBeast: Install macOS Mojave on Any Supported Intel-based PC

Hi guys, i booted from USB but stuck with white apple logo, anything i can do?
Intel i5 2.2G, Intel HD5500 graphic....

Many thx.
 
just share,, my Pc asus H61M socket 1155 processor G2030
hdd sata 500giga
Vga Nvida 210 1Giga 64Bit
Ram DDR3 3Giga

Sukses instal, Elcapitan, Sierra, HighSierra, and this Mojave

my video in youtb open name (computer rd)
instal kext : ok 100%

thanks....tonymacx86
 
Last edited:
I have never successfully formatted a drive for making it bootable with the gui version of diskutil.
The command line works tho
Code:
diskutil eraseDisk JHFS+ DISKNAME disk3
Just be sure of which disk you are formating
 
Hi!!
After I ran Clover and the Apple logo appears, the bar runs until the end and then stays there forever. Anyone know what is causing this, and how can I fix it?
I have a Intel i5-4690 @3.5Ghz with. MSI Z97 PC Mate ( Ms-7850) Board, Nvidia GTX 650.

Cheers
 
Hi!!
After I ran Clover and the Apple logo appears, the bar runs until the end and then stays there forever, anyone knows what can be, and how can I fix it?
I have a Intel I5-4690 @3.5Ghz with. Msi Z97 Pc Mate ( Ms-7850) Board, Nvidia Gtx650

Cheers
Reboot again select your USB from bios then internal drive from Clover. No changes necessary. Shut down and remove USB then boot again.
 
I have never successfully formatted a drive for making it bootable with the gui version of diskutil.
The command line works tho
Code:
diskutil eraseDisk JHFS+ DISKNAME disk3
Just be sure of which disk you are formating

It is always worth disconnecting any drives that you are not installing a new OS on, during the new installation process. Generally the install process will run easier with less hiccups if you only have one drive/disk connected. Also less chance for user error.
 
Back
Top