[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

[hmadoka]

1. Because Clover screen shows Mojave, Prebooter, FileVault, and Recovery it means Stage 1 and Stage 2 of installation were completed. Did you see the Apple welcome screen where you select your region (Japan?), your keyboard, etc?

2. Also, what happens when you remove USB disk and boot from internal Mojave disk?

A1. yes. i look Apple Welcome screen only once (but keyboard & mouse DOWN) . and i force reboot.

A2. boot disk is usb CLOVER. i cant install clover in SSD(mojave) . not yet.

 

[CaseySJ]

A1. yes. i look Apple Welcome screen only once (but keyboard & mouse DOWN) . and i force reboot.

A2. boot disk is usb CLOVER. i cant install clover in SSD(mojave) . not yet.

Are your keyboard and mouse plugged into USB ports HS09 and HS10? Refer to layout diagram in Post 1.

What is RX970?

 

[hmadoka]

Are your keyboard and mouse plugged into USB ports HS09 and HS10? Refer to layout diagram in Post 1.

What is RX970?

keyboard : HS10
sandisk USB(clover) : HS09
mouse : case 2.0 USB (because cant usb 3.1 , 3.0 )

and

keyboard : HS10
mouse : HS09

sandisk USB : case 2.0 usb


all same result....




rx970 (x)
rx570 (o)

my mistake... because be tired... 5day.... day and night...

 

[CaseySJ]

keyboard : HS10
sandisk USB(clover) : HS09
mouse : case 2.0 USB (because cant usb 3.1 , 3.0 )

and

keyboard : HS10
mouse : HS09

sandisk USB : case 2.0 usb

all same result....

rx970 (x)
rx570 (o)

my mistake... because be tired... 5day.... day and night...

You are making progress. Don’t give up!

1. What brand and model of USB keyboard and mouse are you using? Does this keyboard and mouse work on your Mac?
2. When you saw Apple Welcome screen, did you try to unplug keyboard and re-plug keyboard?
3. Please compress and upload your EFI folder from USB disk.

You might have to reinstall MacOS, but first we need to determine why keyboard/mouse did not work.

 

[hmadoka]

You are making progress. Don’t give up!

1. What brand and model of USB keyboard and mouse are you using? Does this keyboard and mouse work on your Mac?
2. When you saw Apple Welcome screen, did you try to unplug keyboard and re-plug keyboard?
3. Please compress and upload your EFI folder from USB disk.

You might have to reinstall MacOS, but first we need to determine why keyboard/mouse did not work.

1. KB and mouse used other hackintoshi (sierra) very well used.

2. nonono... down to show welcome screen. and i force reboot. and i cant look welcome.

3. upload complete ... very very very thank you.



-------------------
cpu : 9gen 9600k
MB : same (bios F4)
ram : 8G samsung x2 (dual channel)
vga : sapphire rx 570
monitor : LG 4K ( use DP cable )
ssd : samsung 250G sata
----------------------------------------------

 

[CaseySJ]

1. KB and mouse used other hackintoshi (sierra) very well used.

2. nonono... down to show welcome screen. and i force reboot. and i cant look welcome.

3. upload complete ... very very very thank you.

-------------------
cpu : 9gen 9600k
MB : same (bios F4)
ram : 8G samsung x2 (dual channel)
vga : sapphire rx 570
monitor : LG 4K ( use DP cable )
ssd : samsung 250G sata
----------------------------------------------

Please backup your USB EFI folder, then download, unzip, and copy the new EFI folder to "EFI Partition" of USB disk. Then try to boot Mojave. If you still see the error message, you might have to reinstall macOS from USB disk.

 

[hmadoka]

Please backup your USB EFI folder, then download, unzip, and copy the new EFI folder to "EFI Partition" of USB disk. Then try to boot Mojave. If you still see the error message, you might have to reinstall macOS from USB disk.

i try it now !

 

[hmadoka]

Please backup your USB EFI folder, then download, unzip, and copy the new EFI folder to "EFI Partition" of USB disk. Then try to boot Mojave. If you still see the error message, you might have to reinstall macOS from USB disk.

same result. cant boot.

screen down. ( look screenshot)



and mouse DOWN in clover boot screen .

KeyBoard is good.

 

[CaseySJ]

Because the boot process stops when trying to Load Kernel Cache, we can rebuild kernel cache like this:

1. Reboot computer and choose "Recovery" volume from Clover screen.
2. If Recovery system starts normally, it will ask you to select Language.
3. Then choose Tools --> Terminal.
4. In Terminal window, rebuild kernel cache like this:

cd /
kextcache -i /Volumes/Mojave

If keyboard works, but mouse does not work, then share the SAME USB port by plugging the keyboard, then removing keyboard, then plug mouse, then remove mouse, then plug keyboard, etc...

Then select Apple Menu --> Reboot.

See if this works. If this also fails, we might have to reinstall MacOS...

 

[hmadoka]

Because the boot process stops when trying to Load Kernel Cache, we can rebuild kernel cache like this:

1. Reboot computer and choose "Recovery" volume from Clover screen.
2. If Recovery system starts normally, it will ask you to select Language.
3. Then choose Tools --> Terminal.
4. In Terminal window, rebuild kernel cache like this:

cd /
kextcache -i /Volumes/Mojave

If keyboard works, but mouse does not work, then share the SAME USB port by plugging the keyboard, then removing keyboard, then plug mouse, then remove mouse, then plug keyboard, etc...

Then select Apple Menu --> Reboot.

See if this works. If this also fails, we might have to reinstall MacOS...

i have not recovery because ssd init for reinstall.