[Guide] Lenovo V510-15ikb

[yota79]

osx reboot after plugin (everytime)

 

[RehabMan]

For now I'd like only to work hdmi , I try to compare the my config.plist to other on the first post that I have tried and hdmi work but not other. Now i try but i have already reboot. I edit only the part on pci device .

I attach the log

You have some incorrect patching going on there...
For some crazy reason, you're patching the LVDS (@0) connector as HDMI!
And you forgot to patch @2 for HDMI.
Read the guide carefully:
https://www.tonymacx86.com/threads/...ndy-bridge-kaby-lake-and-likely-later.189495/

 

[yota79]

I do the patch for the LVDS (@0) becouse in the first post plist it's patched and I think is this the cause for me hdmi didn't work.
I patch @2 for HDMI but didn't work

 

[RehabMan]

I do the patch for the LVDS (@0)

Complete and utter nonsense.

I patch @2 for HDMI but didn't work

No problem reporting files attached.

 

[yota79]

here the log file

 

[RehabMan]

here the log file

MacBookPro14,2 is a poor choice. Use MacBookPro14,1 or MacBookPro11,1.
You forgot to patch @2 for HDMI.
Didn't check anything else.

 

[DimitrisG]

Also cpufriend is used because with native power management the idle clock speed is 1300mhz, with the cpufriend kexts i edited the frequency vector so the lowest achievable clock speed is below 700mhz which helps a lot with the battery.

Are you sure ?
I mean the voltage remains the same. And voltage is the only thing that matters about battery consumption.

 

[yota79]

I change with MacBookPro 4.1 and editing @2 for HDMI like for the @1. But when i put the HDMI the osx reboot instantly.

 

[RehabMan]

I change with MacBookPro 4.1 and editing @2 for HDMI like for the @1. But when i put the HDMI the osx reboot instantly.

Your ioreg shows MacBookPro14,2 still.
Use MacBookPro14,1.

Note: MacBookPro4,1 would be nonsense.

 

[yota79]

For the 4,1 is my error when I write , i would like 14.1
Now Ioreg tell me Macbook 14,1, but the HDMI reboot when I plugin the HDMI Cable.

For information, when I switch the config.plist with the updated on the first post on the first reboot works, after the osx not start again.