Contribute
Register

Surface pro 6 - Kernel panic After 6 seconds.

Status
Not open for further replies.
Hello,
We just understood that config.plist generated by Clover should be removed.
We went to https://github.com/RehabMan/OS-X-Clover-Laptop-Config/archive/master.zip
Picked up and tried three config.plist which might match with the Surface Pro 6, UHD620 graphic.
Of course, before removing the USB, we changed the name of (for ex:) config_UHD630.plist to config.plist and put in the right location EFI/CLOVER/ :
config_UHD630.plist
config_HD615_620_630_640_650_spoof.plist
config_HD615_620_630_640_650.plist

The OSX installer doesn't appear anymore. We even tried to select and unselect stuff in Boot and Graphic sections.
 

Attachments

  • config_HD615_620_630_640_650_spoof.plist
    12.7 KB · Views: 96
  • config_HD615_620_630_640_650.plist
    12.6 KB · Views: 97
  • config_UHD630.plist
    12.4 KB · Views: 120
You probably forgot HFSPlus.efi
I fixed it. But, I am still stuck in End Randomseed.

I redid the guide and this time I used your Clover.

1) I have exactly essentiel EFI files in drivers64UEFI like in your guide. Added HFSPlus.efi and NvmExpressDxe-64.efi.
2) I kept the 4 mandatory Kexts (FakeSMC.kext, VoodooPS2Controller.kext, Lilu.kext, WhateverGreen.kext). I wished to overcome the end randomseed issue.
3) I choose config_HD615_620_630_640_650.plist as you mentioned in this post that "No need for Skylake spoof with Kaby Lake."
4) Make light changes in:
4.1) Boot section : Selected kext-dev-mode=1, rootless=0. Unselected nv_disable=1, -disablegfxfirmware.
4.2) Graphics section : Selected Inject intel. Write in ig-platform-id 0x12345678. Unselect Inject ATI, Inject NVidia.

The result: End Randomseed.
I attached the config_HD615_620_630_640_650.plist picked up in https://github.com/RehabMan/OS-X-Clover-Laptop-Config/archive/master.zip
and the last Clover (I explained how I did), including config_HD615_620_630_640_650.plist renamed to config.plist.

Thank you,RehabMan, for your previous replies.
 

Attachments

  • CLOVER 08dec 18h10.zip
    4 MB · Views: 73
  • config_HD615_620_630_640_650.plist
    12.6 KB · Views: 111
and NvmExpressDxe-64.efi

No need. Remove.

4) Make light changes in:
4.1) Boot section : Selected kext-dev-mode=1, rootless=0. Unselected nv_disable=1, -disablegfxfirmware.
4.2) Graphics section : Selected Inject intel. Write in ig-platform-id 0x12345678. Unselect Inject ATI, Inject NVidia.

Use as-is. Do not edit with Clover Configurator.
If desired, you can set invalid ig-platform-id (can also be done via Clover options).

The result: End Randomseed.

Make sure you're using a USB2 stick.
You should also try with OsxAptioFixDrv-64.efi instead of AptioMemoryFix-64.efi.

You forgot to press F2 and F4 (read FAQ, "Problem Reporting" carefully).
 
I tried 5 different combinaisons with USB2 or USB3. I also did F2 (generated aml files in ACPI/origin/) and F4 (preboot.log) for each of my trials.

19h55
Modified Clover (Razak) by putting back default HD620.plist. Deleting NvmExpressDxe-64.efi.
Kept AptioMemoryFix-64.efi.
Result: Still stuck on Randonseed

20h09
Installed Clover (Razak) in USB3
Change with OsxAptioFixDrv-64.efi instead of AptioMemoryFix-64.efi.
Result: Still stuck on Randonseed

20h53
Installed Clover of Acer Swift in USB2
I tested this because the processor is the same, i5-8250U.
Result: Black screen

21h12
Installed Clover (Razak) in USB2
Result: Still stuck on Randonseed

21h29
Installed (Razak) in USB2
Didn’t install OsxAptioFixDrv-64.efi or AptioMemoryFix-64.efi
Result: Randomseed issue overcome but froze (problem report from message #1)

All the 5 clovers are attached
 

Attachments

  • Clover 0812 21h29.zip
    4.1 MB · Views: 69
  • CLOVER 0812 21h12.zip
    4.1 MB · Views: 59
  • CLOVER 0812 20h53.zip
    10.2 MB · Views: 64
  • CLOVER 0812 20h09.zip
    4 MB · Views: 48
  • CLOVER 0812 19h55.zip
    4 MB · Views: 61
Another updates.
I read tons of posts related on i5-8250U and UHD620.
Tried 3 guides: All are almost identical.

[Guide] Lenovo ThinkPad T440S
Drivers64UEFI > OsxAptioFixDrv-64 instead of AptioMemoryFix-64.efi.
VoodooPS2Controller.kext from https://github.com/RehabMan/OS-X-Voodoo-PS2-Controller

[Guide] HP Elite 8300 / HP 6300 Pro using Clover UEFI hotpatch
Into EFI/Clover/ACPI/Patched, add the SSDT-HP.aml from Sniki repo
Config.plist from Sniki
I added: AppleALC.kext, EFICheckDisabler.kext, USBInjectAll.kext
I didn’t add IntelMausiEthernet.kext

[Guide] Acer Swift 3 i5-8250U High Sierra
I tried PavelIT's Clover as the CPU and GPU are similar to mine. Didn't work.

Result: I am still stuck in the boot, at End Randomseed.
 
Hello,
1) Same result (black screen) with ig-platform-id in 0x12345678 with the original clover from the Mojave on Acer Swift 3 Guide.
2) I tried a new Clover (your clover in guide) with lastest Kexts from scratch and just copied config/plist of Mojave on Acer Swift 3 Guide and changed ig-platform-id. The result is End randomseed.
3) I read the Mojave on Acer Swift 3 Guide and it didn't seem he used specifics kexts for pre-install.

Thank you again for your help RehabMan!
 
I redid one more time.

1) Clover 15h58 is a copy of Mojave on Acer Swift 3 Guide. I changed ig-platform-id in 0x12345678. I did F2 but F4 froze the laptop. In the zip, I only boot with F2.
Result: Black screen

2) Clover 16h17 is a standard version with your clover, lastest Kexts.
I just copy and paste the config.plist of Clover 15h58 with the modification.
Result: End randomseed
 

Attachments

  • CLOVER 1012 15h58.zip
    10.2 MB · Views: 51
  • CLOVER 1012 16h17.zip
    4 MB · Views: 62
Status
Not open for further replies.
Back
Top