Contribute
Register

[Guide] Lenovo V330-15IKB using Clover UEFI hotpatch

Status
Not open for further replies.
@Sniki
1. When you wake up from sleep the laptop is very slow.
2. I had all the kexts in EFI / CLOVER / kexts / Other and the trackpad worked, but when installing them according to the guide in Library / Extensions it stopped working. I put them back in the Other folder but the trackpad has not worked anymore.
Please, can you help me?
And if it can be polished a bit, that is, remove what is not necessary and add what is missing.
Thanks
 
@Sniki
1. When you wake up from sleep the laptop is very slow.
2. I had all the kexts in EFI / CLOVER / kexts / Other and the trackpad worked, but when installing them according to the guide in Library / Extensions it stopped working. I put them back in the Other folder but the trackpad has not worked anymore.
Please, can you help me?
And if it can be polished a bit, that is, remove what is not necessary and add what is missing.
Thanks

There is no ioreg in your debug zip. Please check your files prior to upload.
 
There is no ioreg in your debug zip. Please check your files prior to upload.
Sorry, I'm sending files again.
Thank you so much for help me
 
Sorry, I'm sending files again.
Thank you so much for help me

MacBookPro14,3 is a poor choice. Should be MacBookPro14,1 or MacBookPro11,1.

On account of this major mistake, did not check anything else.
 
MacBookPro14,3 is a poor choice. Should be MacBookPro14,1 or MacBookPro11,1.

On account of this major mistake, did not check anything else.
I have tested both MacBookPro14,1 and 11,1 and there has been no change.
Please, what else should I correct?
 
@Sniki
1. When you wake up from sleep the laptop is very slow.
2. I had all the kexts in EFI / CLOVER / kexts / Other and the trackpad worked, but when installing them according to the guide in Library / Extensions it stopped working. I put them back in the Other folder but the trackpad has not worked anymore.
Please, can you help me?
And if it can be polished a bit, that is, remove what is not necessary and add what is missing.
Thanks
debug using 14.1

USB WiFi not recommended. Remove it and install supported PCIe WiFI hardware as per FAQ:
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Also, I don't think you followed post #1 (ACPI/patched content seems wrong).
 
USB WiFi not recommended. Remove it and install supported PCIe WiFI hardware as per FAQ:
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Also, I don't think you followed post #1 (ACPI/patched content seems wrong).
Solved
Lenovo Ideapad 330-15IKB returned and replaced by the Apple MacBookAir.
Ended the devote so many hours without meaning to the hackintosh when there are more important things to do in life.
Both report files for nothing.
USB Wifi is temporary. I am waiting that the Broadcom BCM94352 which was to replace the Intel, I get something that will no longer be necessary for the MacBookAir.
Still thank you for your time and help.
 
Thanks to #coolstar and #alexandred they fixed the scaling issues on VoodooI2C.
Now all gestures are working perfect and even right click, i went ahead and updated the Post #1 with the newer VoodooI2C.kext + VoodooI2CELAN.kext

To have working right click, don't forget to change the secondary click option as seen in the picture below:

Right click.png


Remember to replace the kexts also on EFI/Clover/kexts/Other as well and ofc to install the newer ones on Library/Extensions/

Enjoy !
 
Status
Not open for further replies.
Back
Top