New Intel NUC NUC8i7BEH compatibily

[RehabMan]

It does not use min 800Mhz. It only goes down to 1300Mhz.

It is working as per Apple design.

 

[RehabMan]

ay you can explain what is not correct, that i can fix it?

The UsbConnector values are wrong. But no need for it at all. Correct UsbConnector values are already in the SSDT-NUC8-BC.aml. You just need USBInjectAll.kext to activate it.

 

[Vanessag]

yep. Thx for your reply. its corrected now. I know that it is in your ssdt. Where i started i try it for my self and build my own kext. so here is the corrected kext.

 

[RehabMan]

yep. Thx for your reply. its corrected now. I know that it is in your ssdt. Where i started i try it for my self and build my own kext. so here is the corrected kext.

The one you attached is now correct.

But note it will only work with Macmini8,1 SMBIOS.
The USBInjectAll.kext technique has no restrictions on SMBIOS.

There just is no need for this kext...

 

[NicoLeOca]

Hi,

thanks for trying to help

@Vanessag I copy/paste your clover folder onto my usb stick and it worked (even while keeping @RehabMan Bios Settings)
however, I moved to hackintosh because I discovered I could rely onto @RehabMan work and continuous support (even if that should never be considered as forever acquired)
Anyway your work helped me to see that my Mojave installation has no issue and that the issues come from my Clover and kexts setup.

@RehabMan I can't share the support file with you as this setup doesn't work.
I am stuck at the first time I have to boot on my SSD with clover on my USB stick
attached is a screenshot of my (rebuild for the 6th time) clover folder

 

[RehabMan]

I can't share the support file with you as this setup doesn't work.
I am stuck at the first time I have to boot on my SSD with clover on my USB stick
attached is a screenshot of my (rebuild for the 6th time) clover folder

The FAQ is quite clear on the required files when you cannot boot.
Please read it carefully.

 

[NicoLeOca]

The FAQ is quite clear on the required files when you cannot boot.
Please read it carefully.

Sorry I missed that in the FAQ

Attached is my clover.zip
it should be verbose
I stroke F2 and F4 before starting
Theme folder is deleted

 

[RehabMan]

Sorry I missed that in the FAQ

Attached is my clover.zip
it should be verbose
I stroke F2 and F4 before starting
Theme folder is deleted

kexts/Other has unneeded kexts (read the guide carefully).
drivers64UEFI looks ok.

Verbose boot photo is missing.
(may have other suggestions depending...)

You should check your BIOS settings...

 

[NicoLeOca]

kexts/Other has unneeded kexts (read the guide carefully).
drivers64UEFI looks ok.

Verbose boot photo is missing.
(may have other suggestions depending...)

You should check your BIOS settings...

Thanks for your patience

Indeed too many kexts, but I was so desperate I tried them all

about BIOS settings:
that one is not available for me
- Security->Security Features, "Execute Disable Bit"
So I can't enable it

Are the photos attached enough for you? (not easy to pick as you must know)

 

[RehabMan]

Thanks for your patience

Indeed too many kexts, but I was so desperate I tried them all

about BIOS settings:
that one is not available for me
- Security->Security Features, "Execute Disable Bit"
So I can't enable it

Are the photos attached enough for you? (not easy to pick as you must know)

Looks like a normal boot.
Keep in mind if you have a 4k display, you will need to use -cdfon and perhaps may be required to use the USB-C connector (as it is DP instead of HDMI).
You can always try an invalid ig-platform-id (0x12345678) in case of display issues.
Also, remember that booting the installer from USB is not quick... so give it plenty of time.