Contribute
Register

[README] Common Problems and Workarounds on 10.14 Mojave

Hi all--have been part of the community since 2012 and have always been able to figure things out on my own by reading through the forums. That streak has come to an end now as I can't even boot. I used another Mac to mount the EFI to check the settings, and everything seems fine. Please help.

Recent updates:
Updated to 10.14: no problem
Updated to 10.14.1: no problem
System as been working just fine for a while running Clover v2.4k r4741, but now out of the blue I can't boot and I can't figure out why.

Attached is my EFI/Clover folder as well a screenshot of the verbose boot screen error. Here's an excerpt:
nx_corruption_detected_int:60: Corruption detected by obj_init:2000 in container DCF76526 . . .
AppleUSBEHCI::StopUSBBus: USBSTS.HCHalted did not set as expected: USBCMD 0x001 0330 USBSTS 0x0000c00c
AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000010

Thank you so much!
 

Attachments

  • IMG_7552.JPG
    IMG_7552.JPG
    3.6 MB · Views: 216
  • EFI_CLOVER.zip
    9 MB · Views: 138
davesha said:
Hi all--have been part of the community since 2012 and have always been able to figure things out on my own by reading through the forums. That streak has come to an end now as I can't even boot. I used another Mac to mount the EFI to check the settings, and everything seems fine. Please help.

Recent updates:
Updated to 10.14: no problem
Updated to 10.14.1: no problem
System as been working just fine for a while running Clover v2.4k r4741, but now out of the blue I can't boot and I can't figure out why.

Attached is my EFI/Clover folder as well a screenshot of the verbose boot screen error. Here's an excerpt:
nx_corruption_detected_int:60: Corruption detected by obj_init:2000 in container DCF76526 . . .
AppleUSBEHCI::StopUSBBus: USBSTS.HCHalted did not set as expected: USBCMD 0x001 0330 USBSTS 0x0000c00c
AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000010

Thank you so much!
Click to expand...

I see in your /EFI/CLOVER/drivers64UEFI/ folder, you have AptioMemoryFix.efi, OsxAptioFix2Drv-64.efi, and OsxAptioFix3Drv-64.efi. You should only have one of these, not all 3 of them. I suggest trying just AptioMemoryFix.efi first and removing the other two.
 
davesha said:
Hi all--have been part of the community since 2012 and have always been able to figure things out on my own by reading through the forums. That streak has come to an end now as I can't even boot. I used another Mac to mount the EFI to check the settings, and everything seems fine. Please help.

Recent updates:
Updated to 10.14: no problem
Updated to 10.14.1: no problem
System as been working just fine for a while running Clover v2.4k r4741, but now out of the blue I can't boot and I can't figure out why.

Attached is my EFI/Clover folder as well a screenshot of the verbose boot screen error. Here's an excerpt:
nx_corruption_detected_int:60: Corruption detected by obj_init:2000 in container DCF76526 . . .
AppleUSBEHCI::StopUSBBus: USBSTS.HCHalted did not set as expected: USBCMD 0x001 0330 USBSTS 0x0000c00c
AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000010

Thank you so much!
Click to expand...

Your profile has no laptop hardware details.
Please fix as per FAQ:
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
 
davesha said:
I didn’t see this was a laptop forum. I only have one desktop Hackintosh system. I’ll try to find the appropriate forum and repost! Sorry about that.
Click to expand...
It is on the laptop forum but tonymacx86 linked it into the MacOS Mojave Installation Guide so i assume we can cover that as well.
 
davesha said:
I didn’t see this was a laptop forum. I only have one desktop Hackintosh system. I’ll try to find the appropriate forum and repost! Sorry about that.
Click to expand...
Sniki said:
It is on the laptop forum but tonymacx86 linked it into the MacOS Mojave Installation Guide so i assume we can cover that as well.
Click to expand...

Even so, this is not a troubleshooting thread.
Best to open a separate thread with complete details in the appropriate forum.
 
RehabMan said:
Even so, this is not a troubleshooting thread.
Best to open a separate thread with complete details in the appropriate forum.
Click to expand...
Yes, that should be the best option.

Also it's time for me to update this thread as it hasn't been updated since the Public Beta 4 or 5 of macOS Mojave, since that time, many things have changed, improved, solved and maybe new issues also showed up.

It is on my schedule for this week.
 
xdevillived666 said:
So using alc allows us to continue using the same layout as before?
Click to expand...

For each audio codec that AppleALC supports, there is a set of layout-id values that are recognized.
Read the AppleALC documentation or look at AppleALC/Resources.
 
@Sniki I noticed you mentioned "black screen after wake from sleep issue" in your initial post. My EliteBook 850 G2 is affected by this issue if I try to run High Sierra or Mojave. I never found a fix and have been running stable on El Capitan for the time being but would like to be able to upgrade in the future if possible. Do you have any idea what causes this issue and can it be attributed to APFS by any chance?
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top