RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,058
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
It looks like the kernel panics I am getting during boot may be related to the ACPI patch EC0 -> EC. I disabled the patch for a few days, and the panics stopped, I re-enabled the patch and the panics immediately started again during boot.
The system will restart a few times, kernel panicking a few seconds after the clover screen, then eventually it will successfully boot.
I have attached debug info, any help would be appreciated. For now, I have disabled the patch, and removed the USBX device from my SSDT-UIAC.aml file and things are fine. Debug was done whilst patch was active and USBX device was present.
You have a lot of other things to work on (should have been done before getting to USB config...):
- CPU PM not implemented
- SATA-unsupported.kext missing (wrong SATA drivers loading)
- probably more if I kept looking...
And...
Your kextcache output proves kexts are not installed correctly.
All kexts you need must be installed to the system volume.
Read post #2 of the Clover guide for details:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
EC0->EC patch should be ok as you have no ECDT, but there is no requirement to use it. You can always add SSDT-EC as an alternate to the rename.