[Updated] Stork's Thunderbolt Build: i5-3570K | GA-Z77X-UP5-TH | GTX 760

[olvido]

Thank you Stork, finally made it to 10.13.6
I'm having a problem exporting to h264 from Davinci Resolve, would it make it work another system definition?

 

[Stork]

Thank you Stork, finally made it to 10.13.6
I'm having a problem exporting to h264 from Davinci Resolve, would it make it work another system definition?

Don't know. I recommend you open a thread in the Graphics forum section.

 

[RuleBreaker01]

Hi Stork,

I update from 10.12.6 to 10.13.6, it was horrible as you mentioned. And I think my system is not really stable at the moment. How about yours? My Console is full of errors and faults. Could you send me your config plist? Do you you use usbinjectall.kext permanently or you patched it in config.plist? I have the same board, so would be great to check with your config, of course not with the smuuid and so on...

 

[Stork]

Hi Stork,

I update from 10.12.6 to 10.13.6, it was horrible as you mentioned. And I think my system is not really stable at the moment. How about yours? My Console is full of errors and faults. Could you send me your config plist? Do you you use usbinjectall.kext permanently or you patched it in config.plist? I have the same board, so would be great to check with your config, of course not with the smuuid and so on...

Let me look at your config.plist. (Remove the SMBIOS serial number before posting.)

 

[RuleBreaker01]

Let me look at your config.plist. (Remove the SMBIOS serial number before posting.)

So please find attached my .plist. i use the following 64bit only driver, i completely boot uefi:
ApfsDriverLoader -64.efi
AppleimageLoader-64.efi
FSinect-64.efi
HFSPlus-64.efi
OSXAptioFix3Drv-64.efi

I use the newst FakeSMC.kext in S/L/E there aswell usbinjectall.kext 0.6.8 and in Clover/EFI/kext/other is only FakeSMC.kext and IntelMausEthernet.kext.

in L/E i have additionaly AHCI_3rdParty_SATA.kext, FakePCIID_XHCIMux.kext, FakePCIID.kext, GenericUSBXHCI.kext, IntelMausiEthernet.kext

In Clover.plist i marked the relevant fields with deleted.

Best Regards

Samuel

 

[RuleBreaker01]

When you boot into recovery partition, open Terminal and type:

repairhomepermissions

An OS GUI will open and ask you if you want to repair your home permissions. Are you able to run that successfully?

 

[Westsurf]

Would anyone be able to advise why I seem to have a installer appearing in Clover?

I certainly didn’t run “install Mojave”.

 

[Stork]

Would anyone be able to advise why I seem to have a installer appearing in Clover?

I certainly didn’t run “install Mojave”.

Do you have your USB Installation thumb drive plugged in? Come to think of it, you may be reading a container (like a partition) at your Clover Boot screen. What's the complete name?

 

[Mgaspar1]

Hello my friends. A user from Brazil here.

I have two hacks. One of them, is with this lovely motherboard. I'm currently running a Gtx 560Ti running the Sierra.
As soon as I get an RX 560 or RX 580 on this Black Friday I also want to migrate to Mojave.

Wish luck to everyone who wants to update the system.
Thank you always for the tips my friend Stork

 

[Stork]

Hello my friends. A user from Brazil here.

I have two hacks. One of them, is with this lovely motherboard. I'm currently running a Gtx 560Ti running the Sierra.
As soon as I get an RX 560 or RX 580 on this Black Friday I also want to migrate to Mojave.

Wish luck to everyone who wants to update the system.
Thank you always for the tips my friend Stork

You'll love your RX 560/580. I have a Sapphire RX 580 Pulse 8GB card in MyHero II build. I also had to change the Frame Buffer with a patch in MyHero II's config.plist. Although Apple supports the Sapphire RX 580 Pulse 8GB card natively in 10.13.6 and Mojave, Apple only "hardwired" into the graphics kext the first two releases Sapphire RX 580 Pulse 8GB card ID #s. So, since my 580 was newer, I had to use the Frame Buffer patch to get the correct Frame Buffer for the card; otherwise it uses the RadeonDefault Frame Buffer. You can tell if you need the config.plist Frame Buffer patch for your 580 by my procedure in the OP of the MyHero II build description, post installation steps. Be advised that my procedure is for the Sapphire RX 580 Pulse 8GB card. If you get a different card, you'll have to find out if it's worth it to you to hunt up the correct Frame Buffer and patch the config.plist with that Frame Buffer.

Speaking of that build...I have a post that shows how to update to Mojave from High Sierra at Post #448 in the MyHero II build description. While your MultiBeast settings for audio and Ethernet chipsets will be different, you can see what the upgrade procedures are like. Be advised that Mojave 10.14.1 still has some bugs (as I state in the post), and, consequently, I don't recommend upgrading from High Sierra until at least 10.14.3 has been released so as to have the major bugs worked out of the OS.