[SOLVED] 10.14.1 USB issues

[cbandes]

Hi folks - I was able to update to 10.14.1 without any issue OTA, but after the update some of my USB ports seem to have disappeared. I have a feeling the answer is that I need to get my act together and make a custom SSDT but I figured I'd ask here first. Oddly enough my AlpineRidge TB/USB-C ports are still working, and at least one of the ports on my front panel.

Edit - solved by following RehabMan's advice and making a custom SSDT. Works like a charm, really wasn't that hard.

 

[RehabMan]

Hi folks - I was able to update to 10.14.1 without any issue OTA, but after the update some of my USB ports seem to have disappeared. I have a feeling the answer is that I need to get my act together and make a custom SSDT but I figured I'd ask here first. Oddly enough my AlpineRidge TB/USB-C ports are still working, and at least one of the ports on my front panel.

https://www.tonymacx86.com/threads/guide-creating-a-custom-ssdt-for-usbinjectall-kext.211311/

 

[dfritchie]

Listen to RehabMan, I've had ZERO USB problems for the last two years... and yes, I'm now running 10.14.1

 

[cbandes]

That guide is pretty intimidating, but I will give it a try!

 

[Douirc]

uh, yeah, tried reading that post and creating a custom SSDT isn't exactly straight forward. anyone have a shortcut?

 

[ryouitou]

uh, yeah, tried reading that post and creating a custom SSDT isn't exactly straight forward. anyone have a shortcut?

I believe there's no shortcut, I didn't create custom SSDT until now and just get my USB 3 work agin after install 10.14.1.

 

[cbandes]

How long did it take @ryouitou ?

 

[ryouitou]

How long did it take @ryouitou ?

Maybe less than 1 and half hours I think, didn't count it.
But searching possible solution take times.

 

[cbandes]

I've read the article a couple times. I can totally spend an hour or two doing this. I just couldn't tell from the article if this was going to be a quick thing, an hour or two, or an all-day project.

 

[RehabMan]

I've read the article a couple times. I can totally spend an hour or two doing this. I just couldn't tell from the article if this was going to be a quick thing, an hour or two, or an all-day project.

Once you know what you're doing, it is about 20 minutes per machine.