Contribute
Register

How to extend the iMac Pro to X99 [Successful Build/Extended Guide]

Status
Not open for further replies.
@JamesKI, confirmed! USB port limit patch approach continues working for 10.13.6 SU and old 10.13.6 patch is still valid.
 
Performance patch 10.13.16 SU

Code: 
Find:    C1E30848 63D389D0 48C1EA20 B9990100 000F3048 FF0579C8 6B004883 C4085B5D C3662E0F 1F840000 000000
Replace: B800FF00 004863D3 89D048C1 EA20B999 0100000F 3048FF05 79C86B00 4883C408 5B5DC390 90909090 909090
 
Last edited:
JamesKI said:
Well that does not work!

https://browser.geekbench.com/v4/cpu/10562586
Click to expand...

Then clarify for yourself why.. Here it is working perfectly. ;)

Screen Shot 2018-10-31 at 14.38.26.png


Screen Shot 2018-10-31 at 14.37.33.png


Screen Shot 2018-10-31 at 14.37.59.png


Screen Shot 2018-10-31 at 14.42.20.png


Screen Shot 2018-10-31 at 14.42.40.png


Did you also enable the 2 SMT patches and the pkg_scope patch? :rolleyes:
 
@kgp yes, my setup from my prior post(with my efi, ioreg, etc) is what I am still using outside of the new performance patch and the updated lilu, whatevergreen & applealc.
 
JamesKI said:
@kgp yes, my setup from my prior post(with my efi, ioreg, etc) is what I am still using outside of the new performance patch and the updated lilu, whatevergreen & applealc.
Click to expand...

You did not answer my question.. Did you also enable the 2 SMT patches and the pkg_scope patch?
 
kgp said:
You did not answer my question.. Did you also enable the 2 SMT patches and the pkg_scope patch?
Click to expand...
Yes those 2 was already enabled as well as the pkg_scope patch per my prior efi posting.
 
JamesKI said:
Yes those 2 was already enabled as well as the pkg_scope patch per my prior efi posting.
Click to expand...

Then it must work!

Good luck ;)
 
JamesKI said:
https://browser.geekbench.com/v4/cpu/10564005

Attached is my efi and ioreg

I know Asrock has not updated the bios in 6 months since last microcode updated:
https://www.asrock.com/mb/Intel/Fatal1ty X99M Killer3.1/index.us.asp#BIOS
Click to expand...

You want my help even before any X99 guide has been updated?

I am currently updating 4 guides, man! I really have not time for your issues right now.

I also cannot update the microcodes of your BIOS firmware for you. My guide implements a detailed guideline how to update the microcodes in ASUS BIOS firmware. If this does not work for your ASRock motherboard firmware, it is out of my hands.

Anyway, OC was working for you under 10.13.6, thus I absolutely see no reason why it should not work under 10.13.6 SU too!

Please get your things set by yourself. I am really busy with the guide updates now, which are also important for other users.

Thanks for your comprehension,

KGP
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top