Contribute
Register

Erro Mojave - Panic(cpu 3 caller 0xffffff80003fb25b) - Reset

Status
Not open for further replies.
Joined
Oct 23, 2018
Messages
13
Motherboard
Asus K46CB - Intel HM76
CPU
i7 3537U / 7 Series
Graphics
HD 4000 / GT 740M
Mac
  1. MacBook Pro
Classic Mac
  1. Portable
Mobile Phone
  1. iOS
Need help!
It worked perfectly in Sierra, no problem. Now Mojave installed with everything working, but with some problems.

Problems:
  • Intel HD Graphics 4000 only 512 MB, malfunction of the viewing screen.
  • When turning on the Mojave, every time it restarted 2 or 3 times in a row to only go into normal operation. Generate error report panic.

I followed the guides of this site, checked bios adjustments, updated clover, inserted new Kexts updated mojave, disabled GT740M, generated and corrected new DSDT and SSDT, among others. Nothing solves the problem, often appear others and need to do restoration.

Someone more experienced could give me a light, what should I try?

Attach the zip file "Problem Reporting" and screen captures with clover and hardware configurations.

Thank you in advance if someone can give me a way.
Thank you.
 

Attachments

  • debug_519.zip
    5.1 MB · Views: 138
  • Prints.zip
    939.3 KB · Views: 103
Need help!
It worked perfectly in Sierra, no problem. Now Mojave installed with everything working, but with some problems.

Problems:
  • Intel HD Graphics 4000 only 512 MB, malfunction of the viewing screen.
  • When turning on the Mojave, every time it restarted 2 or 3 times in a row to only go into normal operation. Generate error report panic.
I followed the guides of this site, checked bios adjustments, updated clover, inserted new Kexts updated mojave, disabled GT740M, generated and corrected new DSDT and SSDT, among others. Nothing solves the problem, often appear others and need to do restoration.

Someone more experienced could give me a light, what should I try?

Attach the zip file "Problem Reporting" and screen captures with clover and hardware configurations.

Thank you in advance if someone can give me a way.
Thank you.

Your kextcache output shows a huge mess.
Do a fresh install.

Do not patch or replace Apple provided system kexts.
 
In original mojave I only replace AppleHDA.kext eIO80211Family.kext.

Should I install clover again or all mojave? The installation of mojave is practically clean, only two changes in kext
 
In original mojave I only replace AppleHDA.kext eIO80211Family.kext.

Should I install clover again or all mojave? The installation of mojave is practically clean, only two changes in kext

I think you should actually *look* at your kextcache output.
 
how do I do this? I'm a beginner and curious. I'm not good at it, just follow the guides. Would you have a link on this that I can read?

I find it strange that after you can call, almost everything works normally (except the video that did not work as it was in the saw). The rest everything 100%.
 
how do I do this? I'm a beginner and curious. I'm not good at it, just follow the guides. Would you have a link on this that I can read?

I find it strange that after you can call, almost everything works normally (except the video that did not work as it was in the saw). The rest everything 100%.

If you don't understand how you got to your current situation with so many problems as shown by your kextcache, best to start over and follow the guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
 
now do not start boot, to test if it will work. following the tips. the config.plist file for HD4000 available in the guide have a lot different thing from the old rain, but I leave as explained.
 

Attachments

  • 342CD701-DC5A-45FC-B076-F1C7A3E94DC8.jpeg
    342CD701-DC5A-45FC-B076-F1C7A3E94DC8.jpeg
    3.1 MB · Views: 328
ok.

Guide:
If you can't boot, a bare minimum is:
- Boot verbose, attach photo
- Attach EFI/Clover folder as ZIP (press F2 then F4 at main Clover screen just before collecting).

Is attached.
thank you.
 

Attachments

  • EFI.zip
    18.5 MB · Views: 137
  • IMG_5780.JPG
    IMG_5780.JPG
    3.5 MB · Views: 390
ok.

Guide:
If you can't boot, a bare minimum is:
- Boot verbose, attach photo
- Attach EFI/Clover folder as ZIP (press F2 then F4 at main Clover screen just before collecting).

Is attached.
thank you.

Your attachment is too large. As a result, I did not download it.

FAQ request is for only EFI/Clover (without themes). It specifically states NOT to attach entire EFI folder.
Why did you attach the entire (large) EFI folder?
Please read the FAQ carefully.
 
Status
Not open for further replies.
Back
Top