Contribute
Register

ASUS ROG STRIX Z390-I Gaming Motherboard specs

Status
Not open for further replies.
Here is the patched SSDT-4 that enables all the usb ports in the back + the usb3 front header + bluetooth.

Now the only thing left that doesn't work is Audio, for some reason AppleALC isn't working properly with the S1220A.
 

Attachments

  • SSDT-4.aml
    10.3 KB · Views: 555
Here is the patched SSDT-4 that enables all the usb ports in the back + the usb3 front header + bluetooth.

Now the only thing left that doesn't work is Audio, for some reason AppleALC isn't working properly with the S1220A.

Did you test the USB 3.1 gen 2?
 
I haven't yet, need to find a device that supports it :D

You can test with any USB device to see if it's at least functional.
 
You can test with any USB device to see if it's at least functional.

I did test every port with a usb2 device, it shows up and it's fully working.
 
I did test every port with a usb2 device, it shows up and it's fully working.

Wow! That's awesome! So the only things left to work out are shutdown/restart and whether or not USB 3.1 gen 2 works at full speed. I was very surprised the M.2 for Wi-Fi worked. There were reports from B360 (I think) users who could not get the to work with non-CNVi Wi-Fi cards.
 
Wow! That's awesome! So the only things left to work out are shutdown/restart and whether or not USB 3.1 gen 2 works at full speed. I was very surprised the M.2 for Wi-Fi worked. There were reports from B360 (I think) users who could not get the to work with non-CNVi Wi-Fi cards.

Yep, and the audio. Which I can't get to work.
re:wifi/bt I also have a AW-CB160H/BCM94360HMB coming today, which it fits the enclosure perfectly so I can reattach the i/o enclosure.

In ioreg, nothing shows up under HDEF, only the displayport/igpu one.
 
Yep, and the audio. Which I can't get to work.
re:wifi/bt I also have a AW-CB160H/BCM94360HMB coming today, which it fits the enclosure perfectly so I can reattach the i/o enclosure.

In ioreg, nothing shows up under HDEF, only the displayport/igpu one.

How are you going to connect the half mini PCI to M.2?

Looking at the spec page on the Asus site, this motherboard uses Realtek S1220A which is the same as what I have on my motherboard. It should work fine. Look for HDAS in IORegistryExplorer. Use AppleALC (along with Lilu) to get it working. Audio-id 1, 2, or 3 should work. I use 2.
 
How are you going to connect the half mini PCI to M.2?

Looking at the spec page on the Asus site, this motherboard uses Realtek S1220A which is the same as what I have on my motherboard. It should work fine. Look for HDAS in IORegistryExplorer. Use AppleALC (along with Lilu) to get it working. Audio-id 1, 2, or 3 should work. I use 2.

Yeah you're right I forgot that's not m2.

Trying AppleALC with id 2 now.
 
OK so Audio doesn't seem to work, it works in Windows, so at least it's not broken. Not sure if there is anything else needed or it might require a different approach.
 
Status
Not open for further replies.
Back
Top