RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,058
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
Ok I used the script, report attached.
After following the guide the current problems are:
1) Sometimes at the end of the boot I get a black screen and I have to shut down and retry to boot.
2) Can't use F11 and F12 to adjust the brightness or the system freezes, but I can adjust it through settings successfully.
3) No audio output is detected anymore.
4) If I put the pc in stop I can't get out of it.
I wasn't having any of these problems when I was on macos 10.12.4 and before I updated my BIOS, if useful I can provide the configuration I had before.
Problems:
- MacBookPro13,2 not recommended. Use MacBookPro13,1 or MacBookPro11,1
- CPU PM not implemented. See guide for good starter plists:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
- USB WiFi not recommended. Install recommended WiFi as per FAQ.
- Your USB configuration is wrong. See guides linked from FAQ.
- you're doing Skylake spoof. Try using native KBL kexts instead.
Also,
All kexts you need must be installed to the system volume (and config.plist/SystemParameters/InjectKexts should be "Detect")
Read post #2 of the Clover guide for details:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
And...
ACPI is patched incorrectly. SystemMemory addresses are mismatched (no wonder you have instability).
Note:
Code:
NUC6i7KYK:origin rehabman$ diff ../origin/ ../patched/|grep SystemMemory
< OperationRegion (GNVS, SystemMemory, 0xA8F33000, 0x0767)
> OperationRegion (GNVS, SystemMemory, 0xA8EEB000, 0x0698)
< OperationRegion (EXBU, SystemMemory, 0xA8F40000, 0x0012)
> OperationRegion (EXBU, SystemMemory, 0xA8EF9000, 0x12)
< OperationRegion (OGNV, SystemMemory, 0xA8F37000, 0x0002)
> OperationRegion (OGNV, SystemMemory, 0xA8EEF000, 0x04)
< OperationRegion (DEGA, SystemMemory, 0xA8F38000, 0x0011)
> OperationRegion (DEGA, SystemMemory, 0xA8EF0000, 0x11)
< OperationRegion (PCF0, SystemMemory, 0xF0100000, 0x0200)
< OperationRegion (PCF1, SystemMemory, 0xF0200000, 0x0200)
< OperationRegion (PCF2, SystemMemory, 0xF00E0000, 0x0300)
< OperationRegion (PCF3, SystemMemory, 0xF00E2000, 0x0300)
> OperationRegion (CPSB, SystemMemory, 0xA85E9F18, 0x10)
> OperationRegion (GPPX, SystemMemory, Add (GADR (Arg0, 0x05), Multiply (Arg1, 0x04)), 0x04)
< OperationRegion (UPSC, SystemMemory, Add (XWMB, U3PS), 0x0100)
< OperationRegion (PCF0, SystemMemory, 0xF0100000, 0x0200)
< OperationRegion (PCF1, SystemMemory, 0xF0200000, 0x0200)
< OperationRegion (PCF2, SystemMemory, 0xF00E0000, 0x0300)
< OperationRegion (PCF3, SystemMemory, 0xF00E2000, 0x0300)
< OperationRegion (ABNV, SystemMemory, 0xA87F1000, 0x0014)
> OperationRegion (ABNV, SystemMemory, 0xA8BDA000, 0x13)
Other things you mention (and even some addressed above) are off-topic.