Contribute
Register

[solved] hackintosh restarts when connecting HDMI cable

Status
Not open for further replies.
Joined
Oct 3, 2018
Messages
9
Motherboard
15-5447-A30
CPU
i7-4510U
Graphics
HD 4400 / R7 M265
Mac
  1. MacBook Air
Mobile Phone
  1. Android
Hi all, I installed my hackintosh successfully Sierra 10.12.6 - everything was working the only problem was HDMI Display when I am connecting my Dell HDMI Display restarts my laptop.
I migrated to Mojave and it's a wonder, but the same problem does not work the HDMI Display.

Somebody help please.
 
Hi all, I installed my hackintosh successfully Sierra 10.12.6 - everything was working the only problem was HDMI Display when I am connecting my Dell HDMI Display restarts my laptop.
I migrated to Mojave and it's a wonder, but the same problem does not work the HDMI Display.

Somebody help please.
No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
 

Attachments

  • debug_24515 2.zip
    28.4 MB · Views: 225
I'm sorry, the file with the report is attached. Thank you.

Your file is much too large.
(you have a lot of garbage in EFI/Clover/kexts/Other... you should NOT have IO80211Family.kext there, and then you have another in 10.13, and one in 10.14!! and one in 10.12/etc/etc)
Please fix it for next time.

You probably need to patch for '12' framebuffer-con1-pipe (or could be con2).
Refer to guide plists.
 
Your file is much too large.
(you have a lot of garbage in EFI/Clover/kexts/Other... you should NOT have IO80211Family.kext there, and then you have another in 10.13, and one in 10.14!! and one in 10.12/etc/etc)
Please fix it for next time.

You probably need to patch for '12' framebuffer-con1-pipe (or could be con2).
Refer to guide plists.
Sorry for the noob question, but can you give more details on how to proceed?
 
Sorry for the noob question, but can you give more details on how to proceed?

Did you read about patching the framebuffer with WhateverGreen yet?
 
Did you read about patching the framebuffer with WhateverGreen yet?
I read but could not understand. I downloaded the Intel FB Patcher, but I do not know how to use it. =(

I tried the LAPTOP DSDT / SSDT Patching, and even then the monitor is not working.

If I do not use Patching DSDT / SSDT, the graphics card is 7 MB, and connecting the monitor to the HDMI output does not output the image and does not turn off the notebook.

But if I use the Patching DSDT / SSDT, gain screen brightness and graphics card is at 1536 MB, but it turns off the notebook when connecting the HDMI monitor.
 
I read but could not understand. I downloaded the Intel FB Patcher, but I do not know how to use it. =(

I tried the LAPTOP DSDT / SSDT Patching, and even then the monitor is not working.

If I do not use Patching DSDT / SSDT, the graphics card is 7 MB, and connecting the monitor to the HDMI output does not output the image and does not turn off the notebook.

But if I use the Patching DSDT / SSDT, gain screen brightness and graphics card is at 1536 MB, but it turns off the notebook when connecting the HDMI monitor.

The guide has plists that enable the graphics kexts without ACPI patching.
See here:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
 
The guide has plists that enable the graphics kexts without ACPI patching.
See here:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
I'm using:
https://github.com/RehabMan/OS-X-Clover-Laptop-Config/blob/master/config_HD4600_4400_4200.plist

Everything is working, audio, screen brightness, wifi ... But the HDMI output is not working. Connects the HDMI cable and laptop reboots.

I do not know what to do anymore ...
 
Status
Not open for further replies.
Back
Top