I recently acquired an HP Elitebook 850 G1 and decided to try throwing Mojave on it, so I followed this guide. I got it installed, but I'm running into an issue with the config.plist for this model from the post-install.
I'm posting this from the laptop. This issue is that when I use the config_8x0_G1_Haswell.plist as the main config.plist, the system reboots shortly after the initial Apple logo after the Clover screen. If I switch to the one I used on my USB installer, which is config_HD4600_4400_4200.plist, it boots to macOS, but of course it's bare bones with no sound or battery and basic touchpad features, which is to be expected since it's rather basic for the installer.
However, if I boot from that same one as the main config.plist, but then from within Clover I select the config_8x0_G1_Haswell.plist and then continue, macOS boots, along with the advantages of having everything working (with the exception of backlight brightness control, but that can wait.)
This is the kind of behavior (when I attempt to boot with config_8x0_G1_Haswell.plist as my main config.plist) that I've seen in the past when I would find that my config.plist was corrupt. However, I can open both of them in Xcode just fine, and it matches the one in the Projects folder. I cannot see anything wrong in the Boot section, and I even tried adding the DefaultVolume, setting it to my macOS hard drive. The only other things I find odd is how the install_acpi.sh script for my model placed SSDT-IGPU.aml instead of IGPUH.aml in ACPI/patched, since this laptop has a 1920x1080 LCD (Would this be enough to cause the issue?), and also how it has "-disablegfxfirmware" in the config.plist boot arguments when I didn't think that was required for this model's chipset.
I attached my problem report file.