Contribute
Register

[Guide] Intel Skylake NUC6 (and Skull Canyon) using Clover UEFI (NUC6i5SYK, NUC6i7KYK, etc)

Status
Not open for further replies.
Hi All,

My setup has been working for nearly one year however it just stops on the apple logo screen.

what can I do to fix it?

What do I need to show here for assistance?

Did you check the system volume in Disk Utility /First Aid (from the macOS installer)?

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
 
after a minute on the apple logo it reboots
 
I cant even get into the os to give you any files
 
I cant even get into the os to give you any files

You should be able to:
1) collect verbose boot photo
2) ZIP EFI/Clover (without themes) from the USB stick and attach
 
Not sure how to get the verbose screen shot and clover is installed on the internal m2. Mac sierra is installed on the ssd drive 250g
 
Well I booted sierra macos off the clover usb so the os is fine.

ZIP EFI/Clover attached
 

Attachments

  • rehab.zip
    3.7 MB · Views: 122
Not sure how to get the verbose screen shot

Use a camera or your phone to take a photo.

and clover is installed on the internal m2. Mac sierra is installed on the ssd drive 250g

OK.

Well I booted sierra macos off the clover usb so the os is fine.

ZIP EFI/Clover attached

This EFI/Clover is from where?
This looks to be a post-install setup, but Clover is very old (you need to update to latest RehabMan build) and Clover/drivers64UEFI and Clover/kexts/Other are not per guide.
Your config.plist is also not up-to-date with respect to the current github project.
 
Its working again im just gonna leave it on high sierra
 
Status
Not open for further replies.
Back
Top