Contribute
Register

pastrychef's Asus ROG Strix Z370-G Gaming (WI-FI AC) build w/ i9-9900K + AMD 6600 XT

I change my UniBeast to 8.1 and it did work for now thanks do you think i can make doable boot up windows and macOS?

You can use this guide to create your USB installer.

Dual boot is possible with any hackintosh.
 
Try each of the DisplayPorts until you find the one that is working.

I have (seen from backside left to right) 2 HDMIs and 2 DisplayPorts. I tried both DisplayPorts. No luck without WhateverGreen.
Maybe it works with HDMI but my monitor doesn't support HDMI 2.0 so its not an option.
 
Please try this one.

You still need to populate the Serial, Board Serial, and UUID.

Thanks for your help. With that config.plist, all the USB ports in the back and the front works.
However, the wonkinest continues: When HS05/SS05 or HS01/SS01 is occupied by a mouse or keyboard, plugging a thumb drive in HS06/SS06 or HS02/SS02 would disable the mouse/keyboard respectively.

Should I try to map my USB ports? What is USR1 and USR2 in the new config file?

D4Pnizz.jpg
 
I have (seen from backside left to right) 2 HDMIs and 2 DisplayPorts. I tried both DisplayPorts. No luck without WhateverGreen.
Maybe it works with HDMI but my monitor doesn't support HDMI 2.0 so its not an option.

Ah. Your card has a different layout than the reference cards. Reference has 1 HDMI and 3 DisplayPort. Not sure how that would affect things.
 
Thanks for your help. With that config.plist, all the USB ports in the back and the front works.
However, the wonkinest continues: When HS05/SS05 or HS01/SS01 is occupied by a mouse or keyboard, plugging a thumb drive in HS06/SS06 or HS02/SS02 would disable the mouse/keyboard respectively.

Should I try to map my USB ports? What is USR1 and USR2 in the new config file?

D4Pnizz.jpg

If you are using the Z370-G, the mapping will be the same.

I have no idea why you are experiencing weird behavior.

USR1 and USR2 are not used.

Try leaving IORegistryExplorer open to see what's going on when you plug things in to USB.
 
If you are using the Z370-G, the mapping will be the same.

I have no idea why you are experiencing weird behavior.

USR1 and USR2 are not used.

Try leaving IORegistryExplorer open to see what's going on when you plug things in to USB.

I had some free time today so I remapped the USB ports.
I realise the dsl file in post #1 is not accurate (m.2 bluetooth USB port is actually HS07, not HS14; HS09 and HS10 should be USB2 only - "UsbConnector" : 0 instead of 3, etc...). Maybe that's your old draft? I've attached my version here.

Also, I find out that the two red USB ports (3.1 gen 2) are not under XHC@14. They are under RP05@1C,4
Top port:
USB3: PRT1: 01 00 00 00
USB2: PRT3: 03 00 00 00
Bottom port:
USB3: PRT2: 02 00 00 00
USB2: PRT4: 04 00 00 00
epVX3jg.png



I'm not sure the red ports should be counted towards the 15, giving that it's controlled by a different chipset:
05vtlCg.png
 

Attachments

  • Strix Z370 USB ports.dsl
    5.6 KB · Views: 114
I had some free time today so I remapped the USB ports.
I realise the dsl file in post #1 is not accurate (m.2 bluetooth USB port is actually HS07, not HS14; HS09 and HS10 should be USB2 only - "UsbConnector" : 0 instead of 3, etc...). Maybe that's your old draft? I've attached my version here.

Also, I find out that the two red USB ports (3.1 gen 2) are not under XHC@14. They are under RP05@1C,4
Top port:
USB3: PRT1: 01 00 00 00
USB2: PRT3: 03 00 00 00
Bottom port:
USB3: PRT2: 02 00 00 00
USB2: PRT4: 04 00 00 00
epVX3jg.png



I'm not sure the red ports should be counted towards the 15, giving that it's controlled by a different chipset:
05vtlCg.png


Yes, I know some of the commenting is wrong. Just been too lazy to fix it. Commenting will not affect functionality.

Oh! Good eye! Yes, I have to correct HS09 and HS10.

Don't worry about the USB 3.1 gen 2, they are not counted in the 15 port limit. They are on a separate controller.

Is your USB working now?
 
Back
Top