Broadcom WiFi/Bluetooth [Guide]

[telepati]

"it" ?
"combo card slot 3" ?

Normally BT+WIFI combo cards are working on slot PCIEX1_1. If I move my combo card to slot PCIEX1_3 on the motherboard it will work or not?

 

[Gigamaxx]

Normally BT+WIFI combo cards are working on slot PCIEX1_1. If I move my combo card to slot PCIEX1_3 on the motherboard it will work or not?

It should but, if you have a graphics card it may change the lane values. 16 pcie lanes to 8 or 4. Or it may not, try it and see.

 

[javachip]

Download config-bcm94352-1x0.plist.zip (above)

• use AirPort.Brcm4360 patches (10.12)

Does this work for 10.13 and above? If it was, where can I download it?

 

[javachip]

ssdt, 94352, see wireless_broadcom/ssdt_arpt

• 10.13/Handoff not working with AirPort.BrcmNIC-MFG.kext
• BCM94352 supported/AirPortBrcmNIC-MFG.kext
• Verify IOReg/RP0x (wifi device name)

I am currently using this wifi card: BCM94352HMB and while checking your instructions for the verify IOReg/RP0x, where do I exactly see the value of x stated from the link using IOReg?

 

[RehabMan]

I am currently using this wifi card: BCM94352HMB and while checking your instructions for the verify IOReg/RP0x, where do I exactly see the value of x stated from the link using IOReg?

BCM94352HMB requirements:
WiFi: AirportBrcmFixup.kext + Lilu.kext
BT: BrcmPatchRAM2.kext + BrcmFirmwareRepo.kext

 

[javachip]

BCM94352HMB requirements:
WiFi: AirportBrcmFixup.kext + Lilu.kext
BT: BrcmPatchRAM2.kext + BrcmFirmwareRepo.kext

Thanks for this, however I followed the steps from step 1, would that be okay?

 

[RehabMan]

Thanks for this, however I followed the steps from step 1, would that be okay?

What do you mean by "that"?

 

[javachip]

What do you mean by "that"?

These instructions:

kext enabler, FakePCIID/RehabMan

• All supported Broadcom WiFi cards/AirPortBrcm4360.kext
• README: RehabMan/OS-X-Fake-PCI-ID
• Download: RehabMan / OS-X-Fake-PCI-ID
• Install with kext installer to ~/Library/Extension:
  • FakePCIID.kext
  • FakePCIID_Broadcom_WiFi.kext
  • Install latest versions as available
• Download config-bcm94352-1x0.plist.zip (above)
  • use AirPort.Brcm4360 patches (10.12)
• Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
  • 10.12+-BCM94352-fvco-darkvoid
  • 10.13/10.12 only
  • 10.11/10.10/10.9 patches - see VII. Previous macOS Support

To clarify my question, I followed the instructions from step 1 to 2 (where I installed the FakePCIID.kext and FakePCIID_Broadcom_WiFi.kext) and I got stucked for the when I was looking for the AirPortBrcmNIC-MFG.kext. Though I followed your instructions from the Wifi and BT since I am using BCM94352HMB, is that going to be okay or should I removed the kexts I installed before installed these: WiFi: AirportBrcmFixup.kext + Lilu.kext and BT: BrcmPatchRAM2.kext + BrcmFirmwareRepo.kext?

 

[RehabMan]

These instructions:



To clarify my question, I followed the instructions from step 1 to 2 (where I installed the FakePCIID.kext and FakePCIID_Broadcom_WiFi.kext) and I got stucked for the when I was looking for the AirPortBrcmNIC-MFG.kext. Though I followed your instructions from the Wifi and BT since I am using BCM94352HMB, is that going to be okay or should I removed the kexts I installed before installed these: WiFi: AirportBrcmFixup.kext + Lilu.kext and BT: BrcmPatchRAM2.kext + BrcmFirmwareRepo.kext?

If you implemented parts of the other methods but plan on doing what I suggested, you should undo the changes you made related to other methods.

 

[Sardeni]

Good afternoon!
Tell me please, I have bought the wi-fi/BT Broadcom card, but from a box it hasn't started working. The seller has sent the reference to this forum.
I installed system according to this instruction.
Wi-fi:
According to your instruction I have installed:

• FakePCIID.kext
• FakePCIID_Broadcom_WiFi.kext

Download config-bcm94352-1x0.plist.zip, but i don't understand, where i should change or replace data.
I downloaded Clover configurator and it's informed, that "config.plist not found"

About BT same problem. I downloaded and installed kexts, but i don't understand, where to find and change files for "Creating a Custom SSDT for USBInjectAll.kext"
I will be very grateful to the help.