Contribute
Register

macOS Mojave is Now Available on the Mac App Store

Status
Not open for further replies.
Updated successfully, just downloaded the installer from AppStore and run on High Sierra 10.13.6

Gigabyte Z97X-UD3H
i7-4790K
16 GB RAM DDR3
Intel HD Graphics 4600 with dual monitor HDMI + DVI
SSD Samsung 850 EVO 500 GB work with Trim enabled

Clover 4676
Kext:
  • AppleALC.kext by toleda with Clover Inject
  • AppleIntelE1000e.kext
  • FakeSMC.kext
  • Lilu.kext
  • NullCPUPowerManagement.kext
  • WhateverGreen.kext
It works very well and looks faster than High Sierra!


View attachment 352435
I have a same system ,because the nv-drivers are not released,so plan to use the Intel HD graphics ,so may I have a file of config.plist from you ,thank you very very much!
 
Black screen for me on install.
Unplugged my second monitor plugged into the 560, and it appears to be installing ok at the moment (28 min remaining...). It may have been installing before, but as screens were black i couldn't see. fingers crossed.
 
I did some research and found out Apple did remove Wi-Fi/Bluetooth support for some Atheros cards AR92xx/93xx in Mojave.

I also found out you can get it back with a little easy trick:
  1. On High Sierra 10.13.6, go to System > Library > Extensions > IO80211Familly.kext > Contents > Plugins
  2. Copy AirPortAtheros40.kext and install it in L/E of Mojave drive (make sure you use KextBeast for installation).
  3. Rebuild kext caches with terminal - sudo kextcache -i /
In my case I didn't even have reboot. Wi-Fi works again immediately after kext rebuild.

I guess I'll hold out on the BCM94331CD/BCM94360CD some other time.

Only issue now is that the fans on my Vega 56 likes to rev up suddenly and not go down. I have to either restart or sleep to get it quiet again.
 
Black screen for me on install.
Unplugged my second monitor plugged into the 560, and it appears to be installing ok at the moment (28 min remaining...). It may have been installing before, but as screens were black i couldn't see. fingers crossed.

That did it! got stuck on login (on the page wanting me to give crash reports to apple), but a reboot sorted it. Both screens plugged back in and all working now.
 
Well I downloaded the Installer but after reading 15-pages of posts and probably 50-50 problems I'm hanging back on actually installing it yet.

1) Still unclear as to where we stand with HFS+. Are HDDs now also formatted at APFS? Any way to force SSDs install to remain HFS+ ?
Does the old script still work?

2) Which WiFi chips have been deprecated?

3) Does NVRAM emulation still work for GPUs and iMessage?

4) Any major apps still not updated for Mojave? 32-bit?

Etc etc.

:rolleyes:
 
These are Kepler Cards and natively supported, no needfor webdrivers with correct smbios

No, it's not that simple. Nvidia mixed the Kepler and Maxwell architectures in the 700 series. The GTX 745, GTX 750 and GTX 750 Ti are Maxwell based cards and not supported with the native macOSX drivers.
 
Will UniBeast and MultiBeast for Mojave be available?

Clover is very complicated for me :(

Hi Clover is not that complicated really - you have the same GA-Z87X as my board so if I may offer you the selections you need to make in Clover to get a successful install, just select all the options in the screen shot and then install to reach the desktop.
In the kext 'Other' folder you will need these latest versions (included with the post). Please let us know how you got on. Good luck.
 

Attachments

  • Screenshot 2018-09-25 at 10.40.11.png
    Screenshot 2018-09-25 at 10.40.11.png
    2.1 MB · Views: 501
  • Archive.zip
    1,012.6 KB · Views: 108
Status
Not open for further replies.
Back
Top