[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

[RehabMan]

Sorry.. I thought it had Intel HD 4000, but i finding some that its totally disabled.

Your profile indicates "ATI FirePro M2000" only (no HD4000), and from what I remember about the 8470w, your profile is, in fact, accurate.

 

[Euro321]

You should test your battery on Windows to verify.

So, under Windows has the same problem. I used powercfg /batteryreport to see the capacity before and after AC plug/unplug and has the same behavior as macOS. So my new battery is defective. It will be replaced under warranty after 14 days because they don't have the battery on stock.

Sorry for spaming the forum with posts when my problem was a hardware problem.

 

[RehabMan]

So, under Windows has the same problem. I used powercfg /batteryreport to see the capacity before and after AC plug/unplug and has the same behavior as macOS. So my new battery is defective. It will be replaced under warranty after 14 days because they don't have the battery on stock.

Sorry for spaming the forum with posts when my problem was a hardware problem.

Nice to hear you have determine the source of the problem.

Goes to show: Must test your assumptions regarding hardware function on Windows before assuming there is some software problem!

 

[Euro321]

Nice to hear you have determine the source of the problem.

Goes to show: Must test your assumptions regarding hardware function on Windows before assuming there is some software problem!

Another question:

Should I bother patch my DSDT ? Your native DSDT have F60 BIOS version and I have F67.

 

[RehabMan]

Another question:

Should I bother patch my DSDT ? Your native DSDT have F60 BIOS version and I have F67.

This guide uses hotpatch for all ACPI patching, not static patch.

 

[Euro321]

This guide uses hotpatch for all ACPI patching, not static patch.

So there is no need. Thanks ! In the meantime I will try search the forums maybe I can find some patch regarding the handoff problem.

 

[RehabMan]

So there is no need. Thanks ! In the meantime I will try search the forums maybe I can find some patch regarding the handoff problem.

There are rumors that handoff is better behaved on hacks in Mojave. I have not really tested it (I think it is a gimmick anyway).

 

[Euro321]

There are rumors that handoff is better behaved on hacks in Mojave. I have not really tested it (I think it is a gimmick anyway).

Yeah, the solution was simple enough: logout from iCloud on my iPad and log back in.

I have Mojave.

I almost never use my iPad because is slow as hell but I like testing new things. I didn't feel the need of this on my Android phone just sometimes on SMS but that's it.

 

[Euro321]

New branch: beta_weg

Everything works just fine ! WhaterverGreen loads just fine and everything seems okay. Just reporting in case if you need feedback.

If you need debug files they are attached

 

[lovemac25]

Hi Rehman!
My laptop HP zbook 15 G2 / 15GHz Core i7-4810MQ / Quadro K1100M + 4600hd / ALC280
I installed hotpatch for high-sierra 10.13.6 on my laptop. But when I was running the command line "./install_downloads.sh" to install kext L / E. after installing some kexts, the laptop is panic then restart immediately. ,The laptop couldn't boot up anymore.
I do not know how to delete the kexts in L / E from the windown, so I backed up with time machine and installed OSX EL Capitan 10.11.6. Now I have 3 OS: windown 10, high-sierra and EL.And when I run the command line on EL, the result stays the same. I try to run the command line then the result is not build .aml(picture)
Can you give me a solution?
If manual build, how to do with .asl files?