Razer Blade 15 - High Sierra 10.13.6 - Success(-)

[RehabMan]

Hello!

I can't go trough the installation.

With the Clover Installation doesn't show up the Apple logo, all the screen gets black. (official installation and Rehabman Clover)

You may need CoreDisplayFixup.kext.
You can use an invalid ig-platform-id to work around graphics problems (then solve them later).

With Unibeast Usb I got stuck after the apple logo, no installation progress bar.

We don't use Unibeast with laptops.

 

[jenue]

Hey,

Somebody else that can help with it? Would be interested to know how the people got through the installation and what flags did they used please.

Thanks!

 

[RehabMan]

Hey,

Somebody else that can help with it? Would be interested to know how the people got through the installation and what flags did they used please.

Thanks!

Did you try CoreDisplayFixup.kext (or WhateverGreen.kext) yet?
External monitor?
Invalid ig-platform-id?

 

[jenue]

Hey!

I have managed to pass the installation with a new hd and the same flags.

Once I am in high Sierra, how I should proceed to install the clover zip that is in previous posts? should I start the clover installation first and replace the clover.zip in the Efi partition?

Some help guys, please!

 

[RehabMan]

Hey!

I have managed to pass the installation with a new hd and the same flags.

Once I am in high Sierra, how I should proceed to install the clover zip that is in previous posts? should I start the clover installation first and replace the clover.zip in the Efi partition?

Some help guys, please!

Typically, you install Clover to the HDD via the Clover installer.
Then configure it (initially) just as you did for USB, then verify you can boot from HDD Clover just as you did from the same Clover setup you had on USB.
Then you start post install tweaking by modifying the HDD Clover setup...

 

[jenue]

Typically, you install Clover to the HDD via the Clover installer.
Then configure it (initially) just as you did for USB, then verify you can boot from HDD Clover just as you did from the same Clover setup you had on USB.
Then you start post install tweaking by modifying the HDD Clover setup...

Thanks!

It is possible to replace the Clover zip that it is in previous posts from the EFI one after I have installed the Clover? or do I need to install the kexts manually that are in that folder?

 

[RehabMan]

Thanks!

It is possible to replace the Clover zip that it is in previous posts from the EFI one after I have installed the Clover? or do I need to install the kexts manually that are in that folder?

You should be careful with what you 'replace' as you don't want to overwrite Clover components that may be newer.

 

[jenue]

You should be careful with what you 'replace' as you don't want to overwrite Clover components that may be newer.

Ok, what should I replace? Config.plist, UEFI64Drivers, Kexts ?

Or those one I should do it manually with the terminal to install the kexts?

 

[RehabMan]

Ok, what should I replace? Config.plist, UEFI64Drivers, Kexts ?

Or those one I should do it manually with the terminal to install the kexts?

It really depends on what you're trying to accomplish.

 

[jenue]

It really depends on what you're trying to accomplish.

I am not sure how is the best way to use the clover zip that it is in the previous posts to make fully working the laptop