Contribute
Register

pastrychef's Asus ROG Strix Z370-G Gaming (WI-FI AC) build w/ i9-9900K + AMD 6600 XT

Please try this EFI.

The only time it asks me to sign in again is when I change system definitions. Maybe clearing your NVRAM will help. Try entering the following in Terminal:
Code:
sudo nvram -c


Also, are you using a PCI-e Wi-Fi/Bluetooth card?

Ok, going to try it. No, I don't have a PCI-e Wi-Fi/Bluetooth card; I use Ethernet.

Update: This is what I get when I try clearing the NVRAM:
nvram: Error clearing firmware variables: (iokit/common) not permitted
 
Ok, going to try it. No, I don't have a PCI-e Wi-Fi/Bluetooth card; I use Ethernet.

Update: This is what I get when I try clearing the NVRAM:
nvram: Error clearing firmware variables: (iokit/common) not permitted

Damnit... Apple changed something in Mojave...

To reset NVRAM, press the F11 key from Clover boot menu.
 
Damnit... Apple changed something in Mojave...

To reset NVRAM, press the F11 key from Clover boot menu.

Reset the NVRAM and put the EFI you sent me onto the EFI Partition, still no mic ;(. I just don't understand why this is happening to me lol. I think it's just an issue with the hardware, and not the software.
 
Last edited:
Reset the NVRAM and put the EFI you sent me onto the EFI Partition, still no mic ;(. I just don't understand why this is happening to me lol. This is literally a fresh install of Mojave.

Is it still asking you to login to iCloud on ever reboot?

For audio, for some reason, it seems you can't use anything but Audio-ID 1... I have no idea why...

Try this:
Screen Shot 2018-09-13 at 9.18.31 PM.png
 
Is it still asking you to login to iCloud on ever reboot?

For audio, for some reason, it seems you can't use anything but Audio-ID 1... I have no idea why...

Try this:
View attachment 350744

No, the iCloud issue was just caused by me changing the EFI... Let me try that and see if it works. Thanks.
 
The M.2 slot has USB built-in. Bluetooth is supported on the card.
Is it likely a hardware problem if my wifi works but bluetooth doesn't (no bluetooth icon in system preferences either)? From the previous replies, it seems like this card should truly be plug and play. Using the recommended BCM94360CS2 card.
 
Last edited:
Is it likely a hardware problem if my wifi works but bluetooth doesn't (no bluetooth icon in system preferences either)? From the previous replies, it seems like this card should truly be plug and play. Using the recommended BCM94360CS2 card.

Did you use the plastic screw to secure the adaptor to the metal cage?

Are you using uia_exclude= in your config.plist? If yes, did you exclude HS07?
 
Back
Top