Contribute
Register

problems, workarounds and more on Lenovo Legion y530 for 10.13 and 10.14

Status
Not open for further replies.
How did I miss something. I did the same. Could you be more specific please?

Attaching zip clover folder and verbo pictures

You will need to provide a photo of the KP before the important data scrolled off screen.

Note that your config.plist has the _DSM->XDSM patch disabled. Hence, SSDT-DiscreteSpoof.aml likely not effective.
 
You will need to provide a photo of the KP before the important data scrolled off screen.

Note that your config.plist has the _DSM->XDSM patch disabled. Hence, SSDT-DiscreteSpoof.aml likely not effective.

Thanks. How do I enable XDSM patch? And the KP is not the "Graphic driver failed to load"?
 

Attachments

  • IMG_20180822_105001.jpg
    IMG_20180822_105001.jpg
    698.8 KB · Views: 212
Thanks. How do I enable XDSM patch?

Look at config.plist, section ACPI/DSDT/Patches. Edit with a plist editor such as XCode or PlistEditPro.

And the KP is not the "Graphic driver failed to load"?

No.
That line is expected due to invalid ig-platform-id.
 
Rehab man, Thank you very much. Finally i could boot to my HS USB. Now im in finder installing clover and kext.
How did i solve?

UnMark on Clover > Config.plist > ACPI > DSDT > Patches > _DSM->XDSM
Boot Clover and reinstall HS with this changes. Thank you very much for your help and your guides!
 
Now im in finder installing clover and kext.

After install Clover to my USB Osx System I couldn't boot to my system, it was very very slow and couldn't boot. The only way that I could boot was using the USB installer's Clover and boot to my USB Osx System.
 
Last edited:
Look at config.plist, section ACPI/DSDT/Patches. Edit with a plist editor such as XCode or PlistEditPro.



No.
That line is expected due to invalid ig-platform-id.

[Update]

"Rehab man, Thank you very much. Finally i could boot to my HS USB. Now im in finder installing clover and kext

After install Clover to my USB Osx System I restart the computer and tried to boot without the USB installer. I couldn't, it was very very slow and couldn't boot. The only way that I could boot was using again the USB installer's Clover and boot to my USB Osx System".

///////////////

I dont know if this problem is due the config plist, I haven't change anything of it, just install a few kexts on clover and S/L/E with Kext utility. And I have a question. I use the "config_HD615_620_630_640_650.plist" from you raw recipe because I thought that my chipset what kaby lake but now I am realize that is Coffe lake. I dont know if this is a problem? I can't find any config.plist on your gihub that match with 8th Gen intel chipset.[/Quote]
 

Attachments

  • PR FILE 32074.zip
    3.7 MB · Views: 167
[Update]

"Rehab man, Thank you very much. Finally i could boot to my HS USB. Now im in finder installing clover and kext

After install Clover to my USB Osx System I restart the computer and tried to boot without the USB installer. I couldn't, it was very very slow and couldn't boot. The only way that I could boot was using again the USB installer's Clover and boot to my USB Osx System".

///////////////

I dont know if this problem is due the config plist, I haven't change anything of it, just install a few kexts on clover and S/L/E with Kext utility. And I have a question. I use the "config_HD615_620_630_640_650.plist" from you raw recipe because I thought that my chipset what kaby lake but now I am realize that is Coffe lake. I dont know if this is a problem? I can't find any config.plist on your gihub that match with 8th Gen intel chipset.
[/QUOTE]

[SOLVED] the error that i made was that i didn't merge the efi clover folder form EFI usb installer to EFI folder from USB OSx

Now i need to accelerate CoffeLake any advice? i already have whatever green and lilu on my EFI CLOVER and i change
Code:
<key>Comment</key>
<string>0x591b0000, 32MB BIOS, 19MB framebuffer 9MB cursor bytes (credit RehabMan)</string>
<key>Disabled</key>
<false/>
to true on my config.plist
 
I fixed a while ago but I didn't post it.

The usb gave me a lot of problems but I was capable to boot without the usb.
1. install clover and check. Themes are Black green Moody
Screen Shot 2018-09-06 at 12.01.16 PM.png
Screen Shot 2018-09-06 at 12.02.39 PM.png
Screen Shot 2018-09-06 at 12.03.21 PM.png
2. After Clover Installation Merge the Clover Folder from USB installer to your System(partition EFI) Clover Folder
3. Add HFS+.efi or Apfs.efi to UEFI64 to be able to read your SSD or USB (depending whether you above the APFS or not)
3. Install Kext needed on L/E (you might need install FAKE SMC and VodooController.kext (green=kext needed to spoof to KBL, gray = kext needed to your System)
Screen Shot 2018-09-06 at 12.08.46 PM.png
4. To spoof your CFL to KBL read> https://www.tonymacx86.com/threads/...heeelp-legion-y530.259105/page-8#post-1803635

NOTE> You may also want (I recommended) not use USB to install OSX, better use SSD. NVMe gave me a lot of problems too.
 
Status
Not open for further replies.
Back
Top