Contribute
Register

Intel UHD 630 Graphics (0x3e918086 i3-8100) Native support with GfxId Injection

Status
Not open for further replies.
my storage device is in legacy mode in bios should I change that to uefi?? does it have anything to do with it at all??

You should definitely be in EFI mode.
 
That shouldn't make any difference. You should check /Library/Extensions/ to make sure that you don't have any hackintosh kexts in there if you are using my EFI folder.
I just emptied the folder now rebooting
 
did rebooted successful emptied the /library/extensions/ but no successs

No, don't empty it... Just make sure hackintosh kexts are not in there. There are some kexts that are there by default and should stay there.
 
Hello everyone ... and sorry for my english !!
It's been 2 days since I can not get HighSierra 10.13.6 to correctly recognize my integrated graphics card on the gigabyte h370m-ds3h motherboard with i3-8100 processor. I use only one monitor connected to the vga port.
I do not know what to do ... if anyone wanted to help me I would be grateful!
Thank you
 

Attachments

  • debug_6479.zip
    234.1 KB · Views: 142
  • Schermata 2018-08-12 alle 10.48.51.png
    Schermata 2018-08-12 alle 10.48.51.png
    128.2 KB · Views: 348
  • Schermata 2018-08-12 alle 10.49.25.png
    Schermata 2018-08-12 alle 10.49.25.png
    77.3 KB · Views: 309
  • Schermata 2018-08-12 alle 10.50.10.png
    Schermata 2018-08-12 alle 10.50.10.png
    23.1 KB · Views: 233
  • EFI.zip
    20.5 MB · Views: 138
Hello everyone ... and sorry for my english !!
It's been 2 days since I can not get HighSierra 10.13.6 to correctly recognize my integrated graphics card on the gigabyte h370m-ds3h motherboard with i3-8100 processor. I use only one monitor connected to the vga port.
I do not know what to do ... if anyone wanted to help me I would be grateful!
Thank you

VGA is an analog output not recommended for Hackintosh and I think I read somewhere if I'm correct not even supported. You will have to use a digital output and then try with different IDs .... But I am In the same boat with no integrated graphics acceleration ...
 
VGA is an analog output not recommended for Hackintosh and I think I read somewhere if I'm correct not even supported. You will have to use a digital output and then try with different IDs .... But I am In the same boat with no integrated graphics acceleration ...

switch to hdmi port but nothing has changed!
 
switch to hdmi port but nothing has changed!
Make sure that the DVMT setting is at least 64MB in your BIOS settings.
 
You don't need both FakePCIID. Use latest version of Lilu + WhatEvergreen (you don't anymore need IntelGraphicsFixup).
Also try enabling "Inject Intel" via Clover Configurator
 
Status
Not open for further replies.
Back
Top