ok when using usb to boot in verbose mode..
Did you use my kext and drivers? config.plist?
Paste this in google
GET I3-8100/I3-8350K UHD 630 IGPU WORKING IN HIGH SIERRA
First page on search, read that guide, METHOD3 (BEST), for "some reason" I cannot hyperlink that website here.
After you follow the steps in how to edit those two kexts, please follow step by step, from 1 to 25, add AppleIntelKBLGraphics.kext and AppleIntelKBLGraphicsFramebuffer.kext toto CLOVER/KEXT/OTHER after you edit them, do not delete them from S/L/E. To answer your question, I have not added any KEXTS to S/L, I know is recommended, but I just keep them in OTHER.
With the above said, and using the kext and drivers I have, you should be good to go, use my config.plist, the patches in there are what make graphics work entirely.
Here are the patches, but again, I already have them in my .plist
In clover configurator, under Kernel and Kext Patches; add
1.
Name
com.apple.driver.usb.AppleUSBXHCI
Find HEX
01050900 00040000 87010000
Replace
02021200 00800000 87010000
Comment
KBL-5912000-Port_0x6_HDMI
2.
Name
AppleIntelKBLGraphicsFramebuffer
Find HEX
02040A00 00040000 87010000
Replace
03041200 00040000 87010000
Comment
KBL-5912000-Port_0x7_DP
3.
Name
AppleIntelKBLGraphicsFramebuffer
Find HEX
03060A00 00040000 87010000
Replace
01011200 00080000 87010000
Comment
KBL-5912000-Port_0x5_HDMI
That is how I got graphics after many days of searching, if you follow what I just told you here, it should get you up, otherwise, I don't know. Good luck
Without that first patch I couldn’t get graphics, on my h370n(current) and h370m (returned) I didn’t use it on my b360n( returned). I’m not expert at all, but it wasn’t till I added it that igpu worked
Without that first patch I couldn’t get graphics, on my h370n(current) and h370m (returned) I didn’t use it on my b360n( returned). I’m not expert at all, but it wasn’t till I added it that igpu worked
Oh, I got you now, looking at it you are right, I wrote that wrong, the name is wrong, i typed it wrong into my plist, and now I cannot remember where I got that patch from while I was researching to get igpu working, I will update my post and clarify that.
so could you re write as i m still unable to boot ..planning for fresh install
I’m at work right now, and even though the “Name” “Comment” of the patch is wrong, the patch itself is right, in other words, it works cause I have it like that in my machine. Name and Comment are used to identify the patch it won’t affect the patch other than the person wouldn’t know what is for, I will edit that comment once I get my hands on my config.plist.
here is my efi..I used your clover folder to config ..but its seems not workingAlright, I had the same issue as you, post your efi folder for me to take a look at it, is late here and I have to get up in a few hours for work, I’ll check it tomorrow. Be patient, that is a virtue, you will be able to fix it, don’t give up
