- Joined
- Dec 28, 2011
- Messages
- 4
- Motherboard
- ASRock Z370M-ITX/ac
- CPU
- i5-8400
Hi all, I've "cloned' @erik's base config :
ASRock Z370M-ITX/ac
Core i5-8400
16GB G-Skill RipJaws V PC4-2400 CL15-16-16-35
Samsung Evo 860 250GB (macOS), 970 EVO 250GB (Win10, not yet connected)
At the moment I haven't used a discrete GPU, I wanted to tinker first with the integrated HD 630.
I'm almost new at the Hackintosh world, I built a hackintosh years ago but I'm a little lost now. I didn't understand your install instructions and I thought MultiBeast should be used for post install. I had no sound (no WiFi/BT either, but didn't change the WiFi chipset so that's normal) but I had network connection and USB ports were working.
I tried to apply multibeast and selected a few modules:
Quickstart
UEFI Boot Module
Drivers
Audio - ALC892
Disk - None
Misc - FakeSMC
Network - None
USB - USBInjectAll
Bootloaders
Clover UEFI Boot Mode
Customize
Graphics Configuration - Intel HD 6xx
SSDT Options - None
System Definitions - iMac 18,3
This has been a bad decision. Now I haven't got sound, none of the USB ports is working and the screen is flickering a lot (Dell UP2715K here, so 5K available with a discrete GPU but only 4K with the 630 graphics, good for me at the moment).
I wonder if I should reinstall everything again and don't run MultiBeast. Tips to solve these issues?
Thanks!
ASRock Z370M-ITX/ac
Core i5-8400
16GB G-Skill RipJaws V PC4-2400 CL15-16-16-35
Samsung Evo 860 250GB (macOS), 970 EVO 250GB (Win10, not yet connected)
At the moment I haven't used a discrete GPU, I wanted to tinker first with the integrated HD 630.
I'm almost new at the Hackintosh world, I built a hackintosh years ago but I'm a little lost now. I didn't understand your install instructions and I thought MultiBeast should be used for post install. I had no sound (no WiFi/BT either, but didn't change the WiFi chipset so that's normal) but I had network connection and USB ports were working.
I tried to apply multibeast and selected a few modules:
Quickstart
UEFI Boot Module
Drivers
Audio - ALC892
Disk - None
Misc - FakeSMC
Network - None
USB - USBInjectAll
Bootloaders
Clover UEFI Boot Mode
Customize
Graphics Configuration - Intel HD 6xx
SSDT Options - None
System Definitions - iMac 18,3
This has been a bad decision. Now I haven't got sound, none of the USB ports is working and the screen is flickering a lot (Dell UP2715K here, so 5K available with a discrete GPU but only 4K with the 630 graphics, good for me at the moment).
I wonder if I should reinstall everything again and don't run MultiBeast. Tips to solve these issues?
Thanks!