[Solved] Error while trying to first boot

[Hol0Ze5]

Hello, I got this error: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>.

Specs:
Motherboard: AsRock Z170 Pro4S.
CPU: Intel Core i5-7600k
GPU: GeForce GTX-1060 6GB
RAM: 16Gb
SSD: Kingston A400 240GB && HDD: 1Tb

 

[P1LGRIM]

Boot in verbose mode and post a picture of the screen when it stops.

 

[Hol0Ze5]

Boot in verbose mode and post a picture of the screen when it stops.

 

[P1LGRIM]

Nothing unusual there - Wait for a while.

 

[Hol0Ze5]

Nothing unusual there - Wait for a while.

After a while

 

[P1LGRIM]

After a while

"Still waiting for root device".
When booting from USB means that there is a problem finding a valid System folder to start up from on your USB flash drive.
This is usually because the flash drive is in a USB3 port.
If this is the case move it to a USB2 port, if it is already in a USB2 port move it to another and try again.
Repeat until you have tried all USB ports.
Use a USB2 flash drive.
If it still doesn't work you could try another flash drive.
You might also try enabling Legacy on your USB3 ports in your BIOS settings.
Try connecting your USB flash drive using a USB2 hub.
Ensure that Fast Boot is not enabled in your BIOS settings.
May require USBInjectAll.kext in /EFI/CLOVER/kexts/Other/.
May need PMHeart’s patch to remove XHCI USB Port Limit in config.plist.
macOS High Sierra 10.13.6 requires a new USB Port Limit patch.

The problem may also occur when your USB controllers are unsupported, if this is the case you should add the appropriate kext to /EFI/CLOVER/kexts/Other/ or try GenericUSBXHCI.kext.

 

[Hol0Ze5]

After USBInjectAll.kext I can install it(thanks!). But resolution is bad. What can I do?

 

[P1LGRIM]

But resolution is bad. What can I do?

Install the web drivers for your graphics card.