- Joined
- Aug 17, 2017
- Messages
- 307
- Motherboard
- ASUS Prime X299 Edition 30
- CPU
- i9-10980XE
- Graphics
- RX 5700 XT
- Mac
- Mobile Phone
All these methods are experimental, for now there is no definitive solution for everyone.
In my case the hotplug works after I have removed the THB_C cable, but I have to have a device connected and turned on before the boot (Belkin TB dock) to make the TH card recognized by the system.
I also noticed that USB3 devices connected to the dock occasionally cause reboot after shutdonwn even if Fix Shutdown is selected in clover (maybe it's your case @Alexilgatto).
I think the key to solve the problem is hidden in the IOReg files that I posted some time ago: comparing the system with connected and disconnected THB_C cable, maybe you could find out the difference and consequently what you need to do to make the TH connection work correctly for PCI cards and therefore also for those with the TH port integrated in the MB.
In my case the hotplug works after I have removed the THB_C cable, but I have to have a device connected and turned on before the boot (Belkin TB dock) to make the TH card recognized by the system.
I also noticed that USB3 devices connected to the dock occasionally cause reboot after shutdonwn even if Fix Shutdown is selected in clover (maybe it's your case @Alexilgatto).
I think the key to solve the problem is hidden in the IOReg files that I posted some time ago: comparing the system with connected and disconnected THB_C cable, maybe you could find out the difference and consequently what you need to do to make the TH connection work correctly for PCI cards and therefore also for those with the TH port integrated in the MB.